MIDIbox

User Tools

Site Tools

Trace:
fadercore_-_vlr-8enc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
fadercore_-_vlr-8enc [2014/07/27 07:48] – novskifadercore_-_vlr-8enc [2014/07/27 21:22] – novski
Line 1: Line 1:
-====== Fadercore ======+====== [[fadercore_-_fadermodule_for_audio_daw|Fadercore]] ======
  
 Standard 220mm wide modules  Standard 220mm wide modules 
Line 47: Line 47:
 The PCB is available under: [[http://vlrlab.com/lang/17-8enc.html]] The PCB is available under: [[http://vlrlab.com/lang/17-8enc.html]]
  
-  * 8 Encoder, 652-PEL12T4226FS1024 not on Projectlist because i deliver cheaper and with cap.+  * 8 Encoder, 652-PEL12T4226FS1024 **not on Projectlist because i deliver cheaper and with cap included..** 
 +The Encoder on VLRlabs.com [[https://www.vlrlab.com/encoder/13-bourns-rgb-led-encoder.html]]
  
  
 ==== How to get Started ==== ==== How to get Started ====
  
 +If its your first SMD soldering you can follow this on t1:58 : http://www.youtube.com/watch?v=5uiroWBkdFY
 +I recommend to not buy solder paste, instead buy some flux-paste like this on Mouser: 590-8341-10ML
  
 ==== Prepare the PCB ==== ==== Prepare the PCB ====
 +Start with the SMD parts and then go on the the conventional parts also on the Bottom side. Don't forget the R11,12,13. 
 +Then go on with the Topside and the LEDs before soldering the Encoder as last. 
 +Check the Connections with a Lens.
  
 ==== Prepare the Connection ==== ==== Prepare the Connection ====
  
 +Connect the core on J8/9 to J1 of the VLR-8Enc board.
  
 ==== Test it in MIOS ==== ==== Test it in MIOS ====
 +
 +To make it work with MIOS .NGC  File we need to know how the shift-registers are connected.
 +
 +**Inputs:**\\
 +1# Encoder         1-4\\
 +2# Encoder         5-8\\
 +3# Encoder Button  1-8\\
 +
 +**Outputs:**\\
 +1# RED Shaft LED   1-8\\
 +2# GREEN shaft LED 1-8\\
 +3# BLUE shaft LED  1-8\\
 +4# LED Ring Row    1-8\\
 +5# LED Ring Selct  1-8\\
 +6# LED Ring Select 9-11\\
 +
 +Assuming that the VLR-8Enc is the first device on the chain of J8/9 we need to configure it like this:
 +\\
 +RESET_HW\\
 +\\
 +LCD "%C"\\
 +\\
 +# Encoder configuration\\
 +\\
 +ENC n=  1   sr=1 pins=0:1   type=detented2\\
 +ENC n=  2   sr=1 pins=2:3   type=detented2\\
 +ENC n=  3   sr=1 pins=4:5   type=detented2\\
 +ENC n=  4   sr=1 pins=6:7   type=detented2\\
 +ENC n=  5   sr=2 pins=0:1   type=detented2\\
 +ENC n=  6   sr=2 pins=2:3   type=detented2\\
 +ENC n=  7   sr=2 pins=4:5   type=detented2\\
 +ENC n=  8   sr=2 pins=6:7   type=detented2\\
 +\\
 +# LEDring configuration\\
 +DOUT_MATRIX n= 1  rows=16 mirrored_row=0 inverted_sel=1 sr_dout_sel1= 4  sr_dout_sel2= 0 sr_dout_r1= 5 sr_dout_r2= 6\\
 +\\
 +# Encoder events\\
 +EVENT_ENC id= 1  fwd_id=LED_MATRIX:1   type=CC chn= 1 cc= 24  lcd_pos=1:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 2  fwd_id=LED_MATRIX:2   type=CC chn= 1 cc= 25  lcd_pos=2:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 3  fwd_id=LED_MATRIX:3   type=CC chn= 1 cc= 26  lcd_pos=3:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 4  fwd_id=LED_MATRIX:4   type=CC chn= 1 cc= 27  lcd_pos=4:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 5  fwd_id=LED_MATRIX:5   type=CC chn= 1 cc= 28  lcd_pos=5:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 6  fwd_id=LED_MATRIX:6   type=CC chn= 1 cc= 29  lcd_pos=6:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 7  fwd_id=LED_MATRIX:7   type=CC chn= 1 cc= 30  lcd_pos=7:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +EVENT_ENC id= 8  fwd_id=LED_MATRIX:8   type=CC chn= 1 cc= 31  lcd_pos=8:1:2 label="^std_enc" LED_MATRIX_PATTERN=2\\
 +\\
 +# Encoder Buttons\\
 +\\
 +EVENT_BUTTON   id=117     hw_id=17   fwd_id=LED:8  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=117     hw_id=17   fwd_id=LED:16 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=117     hw_id=17   fwd_id=LED:24 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=1:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=118     hw_id=18   fwd_id=LED:7  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=118     hw_id=18   fwd_id=LED:15 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=118     hw_id=18   fwd_id=LED:23 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=2:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=119     hw_id=19   fwd_id=LED:6  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=119     hw_id=19   fwd_id=LED:14 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=119     hw_id=19   fwd_id=LED:22 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=3:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=120     hw_id=20   fwd_id=LED:5  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=4:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=120     hw_id=20   fwd_id=LED:13 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=4:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=120     hw_id=20   fwd_id=LED:21 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=4:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=121     hw_id=21   fwd_id=LED:4  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=5:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=121     hw_id=21   fwd_id=LED:12 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=5:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=121     hw_id=21   fwd_id=LED:20 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=5:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=122     hw_id=22   fwd_id=LED:3  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=6:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=122     hw_id=22   fwd_id=LED:11 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=6:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=122     hw_id=22   fwd_id=LED:19 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=6:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=123     hw_id=23   fwd_id=LED:2  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=7:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=123     hw_id=23   fwd_id=LED:10 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=7:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=123     hw_id=23   fwd_id=LED:18 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=7:1:5 label="B^std_btn"\\
 +\\
 +EVENT_BUTTON   id=124     hw_id=24   fwd_id=LED:1  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=8:1:3 label="R^std_btn"\\
 +EVENT_BUTTON   id=124     hw_id=24   fwd_id=LED:9  type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=8:1:4 label="G^std_btn"\\
 +EVENT_BUTTON   id=124     hw_id=24   fwd_id=LED:17 type=cc   chn=1   cc=15   range=0:127    button_mode=OnOff lcd_pos=8:1:5 label="B^std_btn"\\
 +\\
 +LED_MATRIX_PATTERN n=2  pos= 0  pattern=1111110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 1  pattern=0111110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 2  pattern=0011110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 3  pattern=0001110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 4  pattern=0001110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 5  pattern=0000110000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 6  pattern=0000010000000000\\
 +LED_MATRIX_PATTERN n=2  pos= M  pattern=0000111000010000\\
 +LED_MATRIX_PATTERN n=2  pos= 8  pattern=0000010000000000\\
 +LED_MATRIX_PATTERN n=2  pos= 9  pattern=0000011000000000\\
 +LED_MATRIX_PATTERN n=2  pos=10  pattern=0000011000000000\\
 +LED_MATRIX_PATTERN n=2  pos=11  pattern=0000011100000000\\
 +LED_MATRIX_PATTERN n=2  pos=12  pattern=0000011110000000\\
 +LED_MATRIX_PATTERN n=2  pos=13  pattern=0000011110000000\\
 +LED_MATRIX_PATTERN n=2  pos=14  pattern=0000011111000000\\
 +
 +Im using my VLR-8oDisp board to show the Values of every item. You can change it to any other type of Display-setting... lcd_pos=6:1:5 {6=Display number : 1= X-axis : 5= Y-Axis (row)}
fadercore_-_vlr-8enc.txt · Last modified: 2014/07/27 21:23 by novski