Differences

This shows you the differences between two versions of the page.

--- linux_mios32_toolchain_core [2024/04/05 15:29] – [Setup MIOS32 Environment] phatline
+++ linux_mios32_toolchain_core [2024/05/23 19:45] – phatline
@@ Line 2: / Line 2: @@
     for MIOS32 application development on Linux
- \\
 ====== Preparation ======
 This document assumes that you have a relatively modern x86 based linux distribution. While it may work other distributions, it has only been tested on x86 Ubuntu 10.10. Many of the commands, especially "aptitude" are only available on Debian derived distributions like Ubuntu.
@@ Line 32: / Line 31: @@
 *** Arch Linux/Manjaro:** //sudo pacman -S base-devel//\\
-===== GNU Multiple Precision Library =====
-Terminal Commands:\\
-*** Debian/Ubuntu/Mint:**// sudo aptitude install libgmp3-dev// (or //lib32gmp3-dev//   for AMD64Version)\\
-*** Arch Linux/Manjaro:** //sudo pacman -S gmp//\\
 ===== MIOS32 Toolchain =====
@@ Line 95: / Line 91: @@
 Depending on the path where your toolchain is situated, the Example Content off this file is:\\
-//PATH="/home/autark/midibox/gcc-arm-none-eabi/bin"\\
+  * PATH="/home/autark/midibox/gcc-arm-none-eabi/bin"\\
+  * MIOS32_PATH=/home/autark/midibox/mios32\\
-MIOS32_PATH=/home/autark/midibox/mios32\\
+  * MIOS32_BIN_PATH=/home/autark/midibox/mios32/bin\\
-MIOS32_BIN_PATH=/home/autark/midibox/mios32/bin\\
+  * MIOS32_BOARD=MBHP_CORE_STM32F4\\
-MIOS32_BOARD=MBHP_CORE_STM32F4\\
+  * MIOS32_FAMILY=STM32F4xx\\
-MIOS32_FAMILY=STM32F4xx\\
+  * MIOS32_GCC_PREFIX=arm-none-eabi\\
-MIOS32_GCC_PREFIX=arm-none-eabi\\
+  * MIOS32_PROCESSOR=STM32F407VG\\
-MIOS32_PROCESSOR=STM32F407VG\\
+  * MIOS32_LCD=universal\\
-MIOS32_LCD=universal//\\
 if you cant log after reboot, then mostly you messed up your "PATH" variable, in this case, boot with Linuxbootstick, and remove the PATH - line...\\