Differences

This shows you the differences between two versions of the page.

--- book_reviews [2006/02/04 15:13] – smashtv
+++ book_reviews [2012/10/04 15:44] (current) – old revision restored (spam kill) smashtv
@@ Line 1: / Line 1: @@
-=======PIC Programming=======
+====== English ======
+===== PIC Programming =====
+=== PIC Your Personal Introductory Course ===
+by John Morton\\
+ISBN 0 7506 5038 9\\
+Purchased from [[http://www.amazon.com|Amazon]] @ £14.99\\
+This is an introductory book for the beginner.  It commences with fairly simple problems using the less complicated versions of the [[http://www.microchip.com|Microchip]] PICs.  It progresses through to version of PIC having [[EEProms]] and A/D converters.  I think that this is a good book to learn [[assembler]] programming for use with PICs.  However I confess to not having read any other introductory book on the subject!Unfortunately the book does not cover some of the instruction set of the [[PIC18F452]].  This could of course be supplemented by downloads from Microchip.
+=== Embedded Design with the PIC18F452 Microcontroller ===
+by John B. Peatman\\
+ISBN 0 13 046213-6\\
+Purchased from [[http://www.amazon.com|Amazon]] @ £35.99\\
+As you can see above this is not a cheap book.  However, as I progress with trying to understand [[MIOS]] I am finding that I refer to it more and more.  As you can see from its title, it is written specifically for the [[PIC18F452]] that is the current [[microprocessor]] used in MIOS.The main advantage of this book is that it covers in detail the following topics relating to the [[PIC18F452]] under the chapter headings:\\
+- CPU Architecture\\
+- Instruction Set\\
+- LCD Displays\\
+- Interrupts and Interrupt Timing\\
+- Analog to Digital Conversion\\
+- I/O Pin Considerations\\
+- Serial Interfacing\\
+This is not a beginners book! A beginner will need a gentler introduction such as the first book.
+\\
+\\
+====== German ======
+===== C Programming =====
+=== C von A bis Z (German) ===
+von Jürgen Wolf, Galileo Computing\\
+ISBN 3-89842-643-2\\
+[[OpenBook]] (!) oder gebundene Ausgabe: 39,90 €\\
+Ein sehr gutes, plattformübergreifendes (!) und übersichtlich aufgebautes OpenBook.
+Kann man online ansehen, als zip herunterladen (html) oder gebunden bestellen, was will man mehr? :)
+http://www.galileocomputing.de/openbook/c_von_a_bis_z/
+=== C Programmieren von Anfang an (German) ===
+von Helmut Erlenkötter, rororo\\
+ISBN: 3-499-60074-9\\
+Taschenbuch, 9.90 € \\
+What I like about it (besides the price) is that it's very clear structured and contains line-by-line explained examples for every entry; that makes it a valueable book not only to learn but also to look up things later.
+http://www.erlenkoetter.de/html/c.htm
-======PIC Your Personal Introductory Course======by John Morton\\ ISBN 0 7506 5038 9\\ Purchased from [Amazon|http://www.amazon.com] @ £14.99This is an introductory book for the beginner.  It commences with fairly simple problems using the less complicated versions of the [Microchip|http://www.microchip.com] PICs.  It progresses through to version of PIC having [[EEProms]] and A/D converters.  I think that this is a good book to learn [[assembler]] programming for use with PICs.  However I confess to not having read any other introductory book on the subject!Unfortunately the book does not cover some of the instruction set of the [[PIC18F452]].  This could of course be supplemented by downloads from Microchip.======Embedded Design with the PIC18F452 Microcontroller======by John B. Peatman\\ ISBN 0 13 046213-6\\ Purchased from [Amazon|http://www.amazon.com] @ £35.99As you can see above this is not a cheap book.  However, as I progress with trying to understand [[MIOS]] I am finding that I refer to it more and more.  As you can see from its title, it is written specifically for the [PIC18F452] that is the current [[microprocessor]] used in MIOS.The main advantage of this book is that it covers in detail the following topics relating to the [[PIC18F452]] under the chapter headings:\\ - CPU Architecture\\ - Instruction Set\\ - LCD Displays\\ - Interrupts and Interrupt Timing\\ - Analog to Digital Conversion\\ - I/O Pin Considerations\\ - Serial Interfacing\\ This is not a beginners book! A beginner will need a gentler introduction such as the first book.