core4disc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
core4disc [2022/12/29 12:15] – [Order-List] phatlinecore4disc [2023/02/12 13:42] (current) – [Software] phatline
Line 13: Line 13:
 {{:phatline:Core4Disc-shematic.jpg?600|}}\\ {{:phatline:Core4Disc-shematic.jpg?600|}}\\
  
 +i think there is a error - PB2 is not connected to the CORE MODULE FIXME
 ====== Building and BOM====== ====== Building and BOM======
 parts off it is pick and place the other part is handsolder\\ parts off it is pick and place the other part is handsolder\\
Line 72: Line 73:
 1x [[https://www.reichelt.de/at/de/stiftleiste-20-polig-raster-2-54mm-bkl-10120204-p235649.html?&trstct=pol_2&nbc=1|1x20Pin Male 2,54mm Header]]\\ 1x [[https://www.reichelt.de/at/de/stiftleiste-20-polig-raster-2-54mm-bkl-10120204-p235649.html?&trstct=pol_2&nbc=1|1x20Pin Male 2,54mm Header]]\\
 1x [[https://www.reichelt.de/at/de/2x10pol-stiftleiste-gerade-rm-2-54-sl-2x10g-2-54-p19488.html?&trstct=pol_0&nbc=1|2x10Pin Male 2,54mm Header]]\\ 1x [[https://www.reichelt.de/at/de/2x10pol-stiftleiste-gerade-rm-2-54-sl-2x10g-2-54-p19488.html?&trstct=pol_0&nbc=1|2x10Pin Male 2,54mm Header]]\\
-5x [[https://www.reichelt.de/at/de/pfostenbuchse-10-polig-mit-zugentlastung-pfl-10-p14571.html?&trstct=pos_0&nbc=1|2x5Pin 2,54mm FeMale Header]]\\ +5x [[https://www.reichelt.de/at/de/pfostenbuchse-10-polig-mit-zugentlastung-pfl-10-p14571.html?&trstct=pos_0&nbc=1|2x5Pin FeMale 2,54mm Header]]\\ 
-4x [[https://www.reichelt.de/at/de/pfostenbuchse-8-polig-mit-zugentlastung-pfl-8-p284853.html?&nbc=1|2x4Pin 2,54mm Female Header]]\\+4x [[https://www.reichelt.de/at/de/pfostenbuchse-8-polig-mit-zugentlastung-pfl-8-p284853.html?&nbc=1|2x4Pin  Female 2,54mm Header]]\\
  
 {{:phatline:Core4Disc-board.jpg?600|}}\\ {{:phatline:Core4Disc-board.jpg?600|}}\\
 +
 +
 +====== Software ======
 +1. If the Discoveryboard is a virgin-one then upload the bootloader [[http://www.ucapps.de/mios32_bootstrap_experts.html|via stm-utility]]\\
 +2. Upload the [[http://www.ucapps.de/mios32/mios32_bootloader_v1_018.zip|Bootloader]]\\
 +3. Disconnect and Reconnect the USB-Cable to your PC, then type "help" into the MIOS-Terminal, this should print out the actual Board-Configuration, if this happens then:
 +4. Type following commands:\\
 +<code>
 +set lcd_type 0x84
 +set lcd_num_x 26
 +set lcd_num_y 1
 +set lcd_width 128
 +set lcd_height 64
 +store
 +</code>
 +at least this has to be done when using this core for [[Triggermatrix5]]\\
 +
  
  
 ====== To Do ====== ====== To Do ======
-waiting for the assembled Prototype\\+It works! next variant will be, without Discoveryboard and the STM32F407vgt6 directly soldered to the board...\\
  
 ====== Community users working on it ====== ====== Community users working on it ======
core4disc.1672316159.txt.gz · Last modified: 2022/12/29 12:15 by phatline