Differences

This shows you the differences between two versions of the page.

--- linux_mios32_toolchain_core [2024/04/05 15:21] – [Setup MIOS32 Environment] phatline
+++ linux_mios32_toolchain_core [2024/09/30 20:15] (current) – [Download the MIOS32 repository] phatline
@@ Line 2: / Line 2: @@
     for MIOS32 application development on Linux
- \\
 ====== Preparation ======
 This document assumes that you have a relatively modern x86 based linux distribution. While it may work other distributions, it has only been tested on x86 Ubuntu 10.10. Many of the commands, especially "aptitude" are only available on Debian derived distributions like Ubuntu.
@@ Line 26: / Line 25: @@
   (If that doesn't work try:)
   * svn checkout svn://svnmios.midibox.org/mios32/
+now-a-days the repo you get here:
+[[https://github.com/midibox/mios32|https://github.com/midibox/mios32]]
 ===== Linux build utilities =====
@@ Line 34: / Line 36: @@
 ===== GNU Multiple Precision Library =====
 Terminal Commands:\\
-*** Debian/Ubuntu/Mint:**// sudo aptitude install libgmp3-dev// (or //lib32gmp3-dev//   for AMD64Version)\\
 *** Arch Linux/Manjaro:** //sudo pacman -S gmp//\\
+*** Debian/Ubuntu/Mint:** // sudo aptitude install libgmp3-dev// (or //lib32gmp3-dev//   for AMD64Version)\\
+**Ubuntu, Mint troubleshoot:** if it still doesnt build(make) it might be that you use a 64bit Computer, but the toolchain is for 32bit, so you will need additonal following commands:\\
+//sudo dpkg --add-architecture i386//\\
+//sudo apt-get update//\\
+//sudo apt-get install libc6:i386 libstdc++6:i386 zlib1g:i386//\\
+//sudo apt-get install libc6:i386//\\
 ===== MIOS32 Toolchain =====
@@ Line 95: / Line 105: @@
 Depending on the path where your toolchain is situated, the Example Content off this file is:\\
-//PATH="/home/autark/midibox/gcc-arm-none-eabi/bin"
+  * PATH="/home/autark/midibox/gcc-arm-none-eabi/bin"\\
+  * MIOS32_PATH=/home/autark/midibox/mios32\\
+  * MIOS32_BIN_PATH=/home/autark/midibox/mios32/bin\\
+  * MIOS32_BOARD=MBHP_CORE_STM32F4\\
+  * MIOS32_FAMILY=STM32F4xx\\
+  * MIOS32_GCC_PREFIX=arm-none-eabi\\
+  * MIOS32_PROCESSOR=STM32F407VG\\
+  * MIOS32_LCD=universal\\
+if you cant log after reboot, then mostly you messed up your "PATH" variable, in this case, boot with Linuxbootstick, and remove the PATH - line...\\
-MIOS32_PATH=/home/autark/midibox/mios32
+**you can also add more folders to the PATH, they are separeted with a ":", for example:**\\
-MIOS32_BIN_PATH=/home/autark/midibox/mios32/bin
+* PATH="/home/autark/midibox/gcc-arm-none-eabi/bin:/home/autark/program"\\
-MIOS32_BOARD=MBHP_CORE_STM32F4
+here we also have a folder named "program", when you put in there "Mios Studio", then you can write in Terminal "Mios Studio" and mios studio will open\\
-MIOS32_FAMILY=STM32F4xx
-MIOS32_GCC_PREFIX=arm-none-eabi
-MIOS32_PROCESSOR=STM32F407VG
-MIOS32_LCD=universal//