MIDIbox

User Tools

Site Tools

Trace:
lre-oled-bar2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
lre-oled-bar2 [2023/09/07 20:52] – [Building and BOM] phatlinelre-oled-bar2 [2023/09/12 14:24] (current) – [Frontpanel] phatline
Line 12: Line 12:
 Here are the gerberfiles for production - i made it with[[https://jlcpcb.com/|JLCPCB]]\\ Here are the gerberfiles for production - i made it with[[https://jlcpcb.com/|JLCPCB]]\\
 {{:phatline:LRE-OLED-BAR2-Gerber.zip?900|}}\\ {{:phatline:LRE-OLED-BAR2-Gerber.zip?900|}}\\
-{{:phatline:JLCPCB-low-cost.jpg?476|}}\\+These are the settings, if you want to V-Groove it you have to panalize it at 2x4 PCBs at one pcb. 
 +the minimal order is 5 PCBs... so you may have then 4 sets left that you can sell or make a present for anyone...\\ 
 +{{:phatline:LRE-OLED-BAR2-JLCPCB-settings.jpg?476|}}\\ 
 +If you use EuroPacket as shipping method you will pay 26€ / thats incl import duty and taxes!\\
  
 ====== Hardware Requirements ====== ====== Hardware Requirements ======
-  * [[http://www.ucapps.de/mbhp_core_stm32f4.html]]a MIOS32 Core to connect too\\ +  * a[[http://www.ucapps.de/mbhp_core_stm32f4.html|MIOS32-Core]] to connect too\\ 
-  * [[DisplayDriver-SMD]] which buffers the Displays+  * [[DisplayDriver-SMD]] which buffers the Displays, they are already assambled, and 5 pieces costs around 60€ - you only need 1 PCB here (60/5=12€) - the 4 left you will definitfly need some time...\\
   * Soldering Iron - with a Dip that can Handle Thruhole-Parts, solder Paste...\\   * Soldering Iron - with a Dip that can Handle Thruhole-Parts, solder Paste...\\
   * [[mb-lre8x2cs_pcb]] for its nature use\\   * [[mb-lre8x2cs_pcb]] for its nature use\\
   * [[LRE5-LCD2]] as UI to handle Patch management and automation (if you want to use my code...)   * [[LRE5-LCD2]] as UI to handle Patch management and automation (if you want to use my code...)
   * You may need a [[http://www.ucapps.de/mbhp_din.html|DINX4]] Module, in order to get the encoders inbuilt Pushbotton to work\\   * You may need a [[http://www.ucapps.de/mbhp_din.html|DINX4]] Module, in order to get the encoders inbuilt Pushbotton to work\\
 +  * If you have not already - you will need a IDC-Crimper for all your Midibox Cables [[https://www.reichelt.de/at/de/presszange-fuer-schneidklemmverbinder-mit-adaptersatz-delock-86830-p312387.html?&trstct=pos_0&nbc=1|reichelt]]
  
 ====== Shematic ====== ====== Shematic ======
Line 44: Line 48:
 I made a DXF File which you can send to [[https://www.formulor.de/|Formulor in Germany]]\\ I made a DXF File which you can send to [[https://www.formulor.de/|Formulor in Germany]]\\
  
-i panalized it so there are 2 Plates in it\\+2 Plates in one File: {{:phatline:LRE-OLED-BAR2-FP-FORMULAR.zip?700|}}\\
 I payed 40€ summed for booth plates incl shipping from Germany to Austria\\ I payed 40€ summed for booth plates incl shipping from Germany to Austria\\
  
-{{:phatline:LRE-OLED-BAR2-FP-FORMULAR.zip?700|}}\\ 
  
-**Recommend Material from Formulor:**\\ +2 Plates & 2 Plates for a [[• lre5-lcd2]] in one File:{{:phatline:FP-LRE-OLED-2X-EURO-FORMULAR-2xLRE5LCD2.zip?700|}}\\ 
-3mm Acrylglas GS 384x384mm, mittelgrau transparent(7C83)\\+I payed 45€ summed for booth plates incl shipping from Germany to Austria\\
  
  
 +
 +**Recommend Material from Formulor:**\\
 +3mm Acrylglas GS 384x384mm, mittelgrau transparent(7C83)\\
 ====== To Do ====== ====== To Do ======
 The LRE-OLED-Bar  &  The Frontpanel are a Part of my [[MSQ-CC-LRE-V2]]\\ The LRE-OLED-Bar  &  The Frontpanel are a Part of my [[MSQ-CC-LRE-V2]]\\
lre-oled-bar2.1694119939.txt.gz · Last modified: 2023/09/07 20:52 by phatline