Differences

This shows you the differences between two versions of the page.

--- lre-oled-bar2 [2023/09/07 21:17] – [Hardware Requirements] phatline
+++ lre-oled-bar2 [2023/09/12 14:24] (current) – [Frontpanel] phatline
@@ Line 18: / Line 18: @@
 ====== Hardware Requirements ======
-  * [[http://www.ucapps.de/mbhp_core_stm32f4.html]]a MIOS32 Core to connect too\\
+  * a[[http://www.ucapps.de/mbhp_core_stm32f4.html|MIOS32-Core]] to connect too\\
-  * [[DisplayDriver-SMD]] which buffers the Displays
+  * [[DisplayDriver-SMD]] which buffers the Displays, they are already assambled, and 5 pieces costs around 60€ - you only need 1 PCB here (60/5=12€) - the 4 left you will definitfly need some time...\\
   * Soldering Iron - with a Dip that can Handle Thruhole-Parts, solder Paste...\\
   * [[mb-lre8x2cs_pcb]] for its nature use\\
@@ Line 48: / Line 48: @@
 I made a DXF File which you can send to [[https://www.formulor.de/|Formulor in Germany]]\\
-i panalized it so there are 2 Plates in it\\
+Plates in one File: {{:phatline:LRE-OLED-BAR2-FP-FORMULAR.zip?700|}}\\
 I payed 40€ summed for booth plates incl shipping from Germany to Austria\\
-{{:phatline:LRE-OLED-BAR2-FP-FORMULAR.zip?700|}}\\
-**Recommend Material from Formulor:**\\
+Plates & 2 Plates for a [[• lre5-lcd2]] in one File:{{:phatline:FP-LRE-OLED-2X-EURO-FORMULAR-2xLRE5LCD2.zip?700|}}\\
-mm Acrylglas GS 384x384mm, mittelgrau transparent(7C83)\\
+I payed 45€ summed for booth plates incl shipping from Germany to Austria\\
+**Recommend Material from Formulor:**\\
+mm Acrylglas GS 384x384mm, mittelgrau transparent(7C83)\\
 ====== To Do ======
 The LRE-OLED-Bar  &  The Frontpanel are a Part of my [[MSQ-CC-LRE-V2]]\\