Differences

This shows you the differences between two versions of the page.

--- lre5-lcd2 [2023/09/12 13:14] – [BOM LCSC] phatline
+++ lre5-lcd2 [2023/09/12 14:45] (current) – [Building] phatline
@@ Line 33: / Line 33: @@
 {{:phatline:LRE5-LCD2-PCB.png?500|}}\\
+assambled pick and place PCBs costs 60€ in 2021... so one PCB costs arround 6€\\
+but we have to add the other parts wich costs 47€ incl taxes incl shipping in 2023.\\
+a big cost is the frontplate which cost 20€... but if you panalize the frontpanel and order more off it you could reduce this costs massive!\\
+so 47+6€= 53€ for one LRE5-LCD2-PCB. exclusive off this calculation are Knops for the Encoders.\\
 ===== BOM LCSC=====
 these are the parts which must be handsoldered\\
@@ Line 65: / Line 69: @@
 + Ribbon Cables for example (MOUSER):\\
 -63911015521CAB|1\\
+====== Frontpanel======
+{{:phatline:LRE-OLED-BAR2-Frontpanel-BILD.jpg?700|}}\\
+I made a DXF File which you can send to [[https://www.formulor.de/|Formulor in Germany]]\\
+Here a DXF with one Frontplate, ready to upload to Formulor:\\
+I payed 20€ incl taxes and sipping from Germany to Austria\\
+{{:phatline:Formulor-P1-1xLRE5LCD2.dxf.zip?700|}}\\
+**Recommend Material from Formulor:**\\
+mm Acrylglas GS 181x181mm, mittelgrau transparent(7C83)\\
+\\
+If you plan to build a MSQ-CC-LRE wit your LRE5LCD2, then you may save money by use this panalized DXF, where 2x LRE5LCD Panels + 2x MSQ-CC-LRE Panels are placed:\\
+{{:phatline:FP-LRE-OLED-2X-EURO-FORMULAR-2xLRE5LCD2.zip?700|}} ready to upload to Formulor:\\
+I payed 45€ incl taxes and sipping from Germany to Austria\\
+**Recommend Material from Formulor:**\\
+mm Acrylglas GS 384x384mm, mittelgrau transparent(7C83)\\