Differences

This shows you the differences between two versions of the page.

--- mididoc:midibox_cv_v2 [2016/06/26 20:51] – psykhaze
+++ mididoc:midibox_cv_v2 [2016/06/27 11:15] (current) – [MBHP Modules Required] psykhaze
@@ Line 3: / Line 3: @@
 ===== Introduction =====
-MIDIbox CV V2 is the successor of MIDIbox CV V1 with focus on digital, high-resolution modulation of CV outputs and an enhanced control surface.
+MIDIbox CV V2 is the successor of [[:midibox_cv_v1|MB-CV]] V1 with focus on digital, high-resolution modulation of CV outputs and an enhanced control surface.
 [[http://www.ucapps.de/midibox_cv_v2.html|Official Ucapps Page]]
@@ Line 25: / Line 25: @@
 ===== Control Voltages Features =====
-  * Typically 12bit outputs with common MBHP based [[AOUT Module]]. Internally working with 16bit
+  * Typically 12bit outputs with common MBHP based [[:AOUT Module]]. Internally working with 16bit
   * Volt/Octave (positive and negative) and Herz/Volt characteristic
   * Configurable slew rate to "smooth" the output curve (e.g. if controlled only by 7bit CCs)
@@ Line 55: / Line 55: @@
   * [[:Din Module]]
   * [[:Dout Module]]
-  * [[:SCS Module]]
+  * [[:SCS Module]] // (Optional)//
 \\
@@ Line 69: / Line 69: @@
 ==== Led Rings Encoders ====
+{{ :mididoc:neonking:midibox_cv2_lre8x2.jpg?direct&500 |}}
 Up to 32 free assignable rotary encoder functions with support for LED rings are available. The encoders have to be connected to a MBHP_DIN module, the LED rings to four shift registers of a MBHP_DOUT module.
-**[[:mb-lre8x2cs_pcb|LRE8x2]] **
+**[[:mb-lre8x2cs_pcb|LRE8x2 Page]] **