Differences

This shows you the differences between two versions of the page.

--- mididocs:seq:hardwareconfig [2014/09/18 05:59] – [Adding Modules to Your SEQ] borfo
+++ mididocs:seq:hardwareconfig [2014/09/18 20:33] (current) – borfo
@@ Line 11: / Line 11: @@
 ====Config File for the Wilba Frontpanel====
 If you've just built a MIDIbox and all you want is for your Wilba Frontpanel to work, then you really don't need to understand this file.  [[http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fwilba%2FMBSEQ_HW.V4|Here is a standard MBSEQ_HW.V4 file]] for the Wilba Frontpanel.  Just make sure that file exists in your SD Card root.
+====Reassigning Buttons====
+If you like, you can completely reconfigure your button assignments.  If you read through the MBSEQ_HW.V4 file, you'll see that there are a few button assignments available that are not used on the Wilba Frontpanel...  If you're interested in having any of those buttons available on your control surface, you can replace a button assignment that you don't need.  How to do this should be fairly obvious to you as you read through the MBSEQ_HW.V4 file.  If you screw it up somehow, you can just revert to the original MBSEQ_HW.V4 file, no harm done.
 ====Example MBSEQ_HW.V4 files====