Differences

This shows you the differences between two versions of the page.

--- wilba_mb_seq_parts_guide [2009/02/04 16:35] – Wilba
+++ wilba_mb_seq_parts_guide [2018/03/07 21:59] (current) – goyousalukis
@@ Line 1: / Line 1: @@
 **WORK IN PROGRESS**
+===== Parts List =====
+\\
+This parts list corresponds to the PCB labeling on the Wilba Control Surface PCB sold by ModularAddict.com
+^Name       ^Part                    ^Value  ^Quantity ^Reichelt Order Code ^Mouser^
+|**Regular Parts**                                                      ||||||
+|C1-C8     |Capacitor              |100nF   |8        |Z5U-2,5 100N        |594-A104K15X7RF5UAA  |
+|D1-58     | Diode| 1N4148 |58 |1N 4148        |512-1N4148            |
+|E1-17|Encoder+| |17 | |652-PEC16-4220FN0024|
+|L1-16|Bicolor LEDs (red/green, 3mm round, diffused, common cathode)| |16| |859-LTL1BEKVJNN|
+|L17-20, L31-34, L40-58 |LED green, 3mm round, diffused| |27| |859-LTL-4231|
+| |Tempo LED|5mm|1| |604-WP483IDT|
+|R1-R8A|1/4W Resistor |220 ohms (match to your LEDs)|10| |660-MF1/4DC2200F|
+|RN1-12|6 Pin SIL resistor network|10k|12||264-10K-RC|
+|SW1-58|Tactile Switches 12X7.3MM 160GF| |58| |TL1100F160Q|
+| |Switch Caps Switch Cap Rectangle Black| |58| |611-PEBK|
+|U1-U6|74HC165 shift register| |6| |595-SN74HC165N|
+|U7-8|74HC595 shift register| |2| |595-SN74HC595N|
+| | |16 pin IC Socket| | |575-199316|
+|J1-2|10 pin IDC Socket++|10 pin|2| |571-5103309-1|
+| |10 Pin IDC Header|10 pin|2| |710-61201023021|
++ see details about different encoder options below
+++ consider alternate sources like Amazon, AliExpress, eBay, ect.. for IDC headers/sockets. They are often sold in bags of 10.
 **REQUIRED AND WILL INCLUDE IN BULK ORDER**
@@ Line 9: / Line 32: @@
 If you already have encoders from Voti: [[http://www.voti.nl/winkel/catalog.html?SW-ROT]] or from a bulk order for Soundwell, then these will work.
+x black Re'an P401 soft-touch knobs.
+Identical to those distributed in nebula's bulk order: [[http://www.midibox.org/forum/index.php/topic,11050.0.html]]
 x Datawheel Knob:
@@ Line 21: / Line 48: @@
 * switch is a "standard" 12x12mm tactile switch, but the rectangular switch cap specified below requires this exact switch.
+Added Aug 2015:
+The current PCB from SmashTV has footprints for alternate tact switches.
+Namely: TL-1240 [[http://www.mouser.com/ds/2/140/TL1240-346152.pdf]] and Mec 3F series [[http://www.mouser.com/ProductDetail/MEC-Switches/3FTH9/?qs=sGAEpiMZZMsqIr59i2oRcvYAxqB10yDKjM3xh7wCZYw%3d]]
+The TL-1240 are short (8.2mm) so they cannot be used with encoders installed but are wired correctly for the LEDs.
+The Mec parts are tall and have a variety of caps but the LEDs are NOT wired to anything despite having pads and will need to be wired by hand.  The 3 pin LEDs cannot be used with these switches.  Only the 3F Mec parts are suitable, the 5F and others may fit the footprint, but use a different scheme for the LEDs that wont work at all with this board
 x Switch cap (black):
 [[http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=401-1152-ND]]
-[[http://www.mouser.com/Search/ProductDetail.aspx?qs=qUgWstB0J2Od%252btwj9sasJw%3d%3d]]
+[[http://www.mouser.com/ProductDetail/CK-Components/PE-BK/?qs=sGAEpiMZZMsqIr59i2oRctAaD8wfjvPOMa0ZOJ%252b2auk%3d]]
 * switch cap requires the switch specified above.