====== How to use AOUT + SEQ_V2 ======

Aim of this text is to help you understand how to control the AOUT Module from te SEQ_V2.

If you want to route a sequencer track to the AOUT module:
  - go to the "EVENT" page of the menu.
  - select "AOUT"
  - select the desired "Channel" (1-16)

The 16 "Channels" represent different modes of the AOUT:

  * Channel 1-4 are used for notes.
  - Channel 1: Gate 1, Note Value -> CV 1, VEL Value -> CV 2
  - Channel 2: Gate 2, Note Value -> CV 3, VEL Value -> CV 4
  - Channel 3: Gate 3, Note Value -> CV 5, VEL Value -> CV 6
  - Channel 4: Gate 4, Note Value -> CV 7, VEL Value -> CV 8

  * Channel 5-8 are used for controller data.
  - Channel 5: Gate 1, CC -> CV 1, VEL Value -> CV 2
  - Channel 6: Gate 2, CC -> CV 3, VEL Value -> CV 4
  - Channel 7: Gate 3, CC -> CV 5, VEL Value -> CV 6
  - Channel 8: Gate 4, CC -> CV 7, VEL Value -> CV 8

  * Channel 9-16 are used for direct acces to the CV's 1-8 via LAYER B/Velocity!!!
  - Channel  9: VEL Value - > CV 1
  - Channel 10: VEL Value - > CV 2
  - Channel 11: VEL Value - > CV 3
  - Channel 12: VEL Value - > CV 4
  - Channel 13: VEL Value - > CV 5
  - Channel 14: VEL Value - > CV 6
  - Channel 15: VEL Value - > CV 7
  - Channel 16: VEL Value - > CV 8

Gate 3/4 are a planned feature and not implemented in the hardware yet.