Give a UserInterface-Skelleton for follwing Hardware:

MB-SEQ-CS (WILBA PCB - manufactured from SmashTV)


you can test the hardware whit the firmware:
wilba-seq-cs-hw-test.hex  << there you will test each LED individually - choosen by Jog-Shuttle + Any Button Press - if you are a programmer and need to know wich number internally has...
wilba-seq-cs-hw-test-blinking.hex << there all LED will be blinking, so you see that you soldered them alright....


Shiftregisters inter-connections:
STM34F4 CORE [J8/J9] > [J1]MB-SEQ-CS-Wilba[J2] > then all other stuff like track-position-display



greets Triggermatrix, Phatline, IH8mini*, Technomiliz, MPy, Crimic - Michi sigl 2018
