olga42's Blog

Finally mounted all the PCBs on one of the 2 more or less identical modulars we're building over at the labs. I made some 2cm (0.787 inches if you prefer mongoloid units of measurement) thick strips of brass. Those were perforated with a 10mm hole so that they can sit between the pots and the front panel, then I added a small hole for the M3 screw tha...

Lately I've been working on the proper control surface of the 6582 having run the mighty 6582 in a somewhat completed state with a perfboard control surface just for lulz. I followed Hawkeye's excellent tutorial on the CS construction but mixed and matched with the older methods from Wilba's construction hints where applicable just to be non-c...

This morning saw the panel components fitted to the paper copy of the panel in order to check the clearance around the knobs, switches and jacks. It looked promising and photos reside in a Canon somewhere. I hope to put those up later, plus a quick how-to for people using Front Panel Designer - there are some interesting tricks to discover.Then came the t...

Been at it for some time now. I'm building a mystery.   I figured that it would be nice to combine the awesomeness in a cute little box that is the MB SEQ with my ongoing modular. I snatched a couple of sequencer front panels from Julian F and finished two sequencers, one for me, one for my partner in crime - mr F.After assembling a whole hos...