0
Midibox Mania goes on
Posted by
Zossen
,
24 May 2012
·
29 views
I have finished all Parts for the Midi-Mixer
but now i have to wait for the Faceplate/Case <- gone for Sandblasting and Powder Coating in white.
So have started the rebuilt of the Sequencer V2 (and upgrade to V3)- have bought it in the Forum. (thausand thanks to Alex!!! )
First i have testet it and than desolderd everything into basicparts.
- 2 Lcd's
- all Pcbs (the Core V2 will be replaced by Ultracore-Pcb with 2 II2c Midiouts)
- nice buttons and Alps Encoders
- from a Tuner and Tapedeck i have added a few Buttons for F1-4 and the Play,ffw,rew- Section (and i have a few buttons with Led left over for my Mixer : ) )
After a few days i have a good prototype working.
picssaymore...
and started the design of the Faceplate and the Case
and this is the front now
edit : do not use this like it is <- it still missmatches a few parts
one time again i have to print and cut out the holes and if everything fits it gets converted for the SVG-File for the Acryl-faceplate.
but now i have to wait for the Faceplate/Case <- gone for Sandblasting and Powder Coating in white.
So have started the rebuilt of the Sequencer V2 (and upgrade to V3)- have bought it in the Forum. (thausand thanks to Alex!!! )
First i have testet it and than desolderd everything into basicparts.
- 2 Lcd's
- all Pcbs (the Core V2 will be replaced by Ultracore-Pcb with 2 II2c Midiouts)
- nice buttons and Alps Encoders
- from a Tuner and Tapedeck i have added a few Buttons for F1-4 and the Play,ffw,rew- Section (and i have a few buttons with Led left over for my Mixer : ) )
After a few days i have a good prototype working.
picssaymore...
and started the design of the Faceplate and the Case
and this is the front now
edit : do not use this like it is <- it still missmatches a few parts
one time again i have to print and cut out the holes and if everything fits it gets converted for the SVG-File for the Acryl-faceplate.
