Features: PIC 18F4685.Leds Meter for each channel. In Circuit programming (bootloader).Jumper for select PortA Pin0-7 or PortA Pin4-7 + PortB0-3 on DB15 connector. (Future extension ex: old Joystick).Midi I/O with leds.Two Audio output with jumper selection, depends on TIA chip.
1
Antichambre's Blog
MB-TIA Cartridge. Max Manager Software and Drum Kit Sound Demo.
Posted by
Antichambre
,
25 August 2011 -
·
60 views
·
60 views
Firmware is working.Manager is ready.Features: 2 dedicated envelopes with optional non-linear curve for each voice, which can be assigned to Pitch and Volume2 additional envelopes with optional non-linear curve which can be assigned to Pitch and Volume 4 additional LFOs with different waveforms which can be assigned to Pitch and Volume Pitch Bender Porta...
MB-TIA Cartridge. The TIA (Television Interface Adaptor)
Posted by
Antichambre
,
30 May 2011 -
·
65 views
·
65 views
The Television Interface Adaptor (TIA ) is the custom chip that is the heart of the Atari 2600 game console, generating the screen display, sound effects, and reading input controller.I/O Pin: Clock and CPU Synchronization: The 3.58 MHz oscillator (OSC Pin) also clocks a divide by three counter on this chip whose output (1.19 Mhz) is buffered to d...
I'm probably a bit nostalgic for a time I played the game console in the living room of my parent.Need electronic sounds that have traumatized my childhood.The Atari 2600. I started this project 5 years ago. The first prototype I built was too big and too expensive to manufacture and not programmed into MIOS: A friend of mine recently reminded me that...
