Community Blog List

← View Blog Home

Blogs (Mark all blogs as read)
Blog Name	Owner	Entries / Comments	Last activity
Antichambre's Blog MB-TIA Cartridge MB-TIA Cartridge. PCB Drawn. Features: [list][]PIC 18F4685.[]Leds Meter for each channel.[] In Circuit programming (bootloader).[]Jumper for select PortA Pin0-7 or PortA Pin4-7 + PortB0-3 on DB15 connector. (Future extension ex: old Joystick).[]Midi I/O with leds.[]Two Audio output with jumper selection, depends on TIA...	Antichambre	4 Entries 13 Comments / 4,765 Views	MB-TIA Cartridge. PCB Drawn. Last activity: 11 January 2012 - 12:13
olga42's Blog Musings and construction Modular mania Finally mounted all the PCBs on one of the 2 more or less identical modulars we're building over at the labs. I made some 2cm (0.787 inches if you prefer mongoloid units of measurement) thick strips of brass. Those were perforated with a 10mm hole so that they can sit between the pots and the front panel, then I added a small hole for the M3...	jojjelito	4 Entries 9 Comments / 4,211 Views	Modular mania Last activity: 24 November 2011 - 12:22
MB TWINsid Blog TWINsid TWINsid v1.2 The Files TWINsid v1.2 The Files TWINsid.hex [url="http://midibox.org/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=9282"]TWINsid SR Board...	yodabe	3 Entries 8 Comments / 3,602 Views	TWINsid v1.2 The Files Last activity: 29 October 2011 - 16:39
stilz&Rumpel's Blog Building an MB808 with my brother Encoder PANASONIC EVEQDBRL416B eagle lib Here is the eagle library I use: Encoder PANASONIC EVEQDBRL416B greetz Jonas	stilz&Rumpel	5 Entries 12 Comments / 4,010 Views	Encoder PANASONIC EVEQDBRL416B eagle lib Last activity: 13 September 2011 - 20:51
MB9090 Blog follow how it goes with my project MB9090 continuing my blog on http://www.bloggen.be/mb9090/ hey all, I am continuing my blog on http://www.bloggen.be/mb9090/ that way everybody can see how it is going with my project. Cheers Jef	pcbatterij	4 Entries 25 Comments / 5,810 Views	continuing my blog on http://www.bloggen.be/mb9... Last Entry: 07 May 2011 - 11:23
Zossen's Blog MidiBox Controller #2. Versuch Zwischeneintrag -Pfostenleisten sowie fehlende IC Sockel bestellt -Leds geklebt -Potiknöpfe bestellt (altes Mischpult) - Platinenlayout fertigstellen für #to do - Bohrungen/Stichsägenloch für die Aluencoderplatten machen - Loch für Kaltgerätebuchse - Löcher für die Platinenfassungen bzw. Sockel	Zossen	4 Entries 0 Comments / 3,147 Views	Zwischeneintrag Last Entry: 15 April 2011 - 10:10
Digineural's Blog random musings of a midiboxer 808Micro - Control Surface In general I don't recommend starting any project with an enclosure that is smaller than what you can fit a proto version of your project in. But my enclosure supply just about gone, so I'll use what I have. The tekbox from TEKO enclosures. ([i]NOTE: If for some...	Digineural	2 Entries 6 Comments / 4,109 Views	808Micro - Control Surface Last Entry: 12 March 2011 - 22:24
bilderbuchi's Blog MIDIbox SlideControl build log MIDIBox SlideControl is a remote control solution for Kodak Carousel slide projectors aimed at event usage. It was a sometimes painful process of about 1.5 years to arrive at the solution at last. Success would not have been possible without the great midibox community! Thank you! Introduction...	bilderbuchi	1 Entries 0 Comments / 4,518 Views	MIDIbox SlideControl build log Last Entry: 07 December 2010 - 11:20
Rics' 4Decks Midibox controller Step 3 - Svn download and apps compiling Yes, i admit, i'm slow as a turtle. But as a turtle i've put out my head, and today out in direction to the blog! ...	Rics	4 Entries 0 Comments / 5,615 Views	Step 3 - Svn download and apps compiling Last Entry: 21 November 2010 - 10:19
taximan's home base Useful links and expenses MBFM innards diode orientation.jpg 100_1208.JPG 100_1206.JPG 100_1205.JPG 100_1204.JPG 100_1203.JPG 100_1202.JPG 100_1201.JPG 100_1200.JPG 100_1199.JPG 100_1198.JPG 100_1197.JPG 100_1196.JPG 100_1195.JPG 100_1194.JPG 100_1193.JPG 100_1192.JPG 100_1190.JPG 100_1189.JPG 100_1188.JPG 100_1187.JPG 100_1186.JPG	taximan	3 Entries 0 Comments / 4,951 Views	MBFM innards Last Entry: 06 September 2010 - 16:54
Duggle's Blog Midibox design and construction notes Signal Integrity for long SRIO chains (MIOS32) Abstract Discussion of the problems limiting the length of SRIO chains. Some causes of signal integrity problems in transmission lines are mentioned. A Working solution is presented. Introduction The problems limiting the length (physical length and the number of chips connected) of DOUT shift registers has been canvassed Discussion thread...	Duggle	4 Entries 2 Comments / 6,884 Views	Signal Integrity for long SRIO chains (MIOS32) Last Entry: 12 September 2010 - 01:07
Joeri's Blog MB-6582 Underway I have decided to put my MBFM on hold. And build a MB6582 first. This way i can see how a frontpanel design works out before i order a new design for the MBFM.	Shuriken	2 Entries 0 Comments / 3,655 Views	MB-6582 Underway Last Entry: 10 May 2010 - 16:04
Twin-X's Blog Wel someone had to be the first! So the blog looks diffrent? Indeed. After i got a message from shuriken. Seems something wrong with date setting. Anyway the software is completely new. This was a suprise to me. So start blogging!	Twin-X	2 Entries 0 Comments / 3,454 Views	So the blog looks diffrent? Last Entry: 10 May 2010 - 13:30
Project "Desire MC1" Development of an unversal DJ "Media Controller" for use with Mixxx and Traktor Pro Desire MC1 - First Progress Hello everybody much time hast past since my last entry here, but this project is not dead. what happened in the meantime? my studies ate up much more time than I planned, so I had to change priorities. but its not all about math and machine...	Nasrudin	2 Entries 2 Comments / 3,747 Views	Desire MC1 - First Progress Last Entry: 14 January 2010 - 21:55
protofuse's Blog max for live documentation part initiated I began the documentation about the interface between my protodeck controller and ableton live software. It uses a max for live patch. All is there: http://www.julienbay.../protodeck/#m4L	protofuse	3 Entries 2 Comments / 3,410 Views	max for live documentation part initiated Last Entry: 16 February 2010 - 19:08
Phil's MBSEQv4 My front panel arrives I ordered a front panel for my Sequencer (using Wilba's design) from Julian at www.thebeast.co.uk. [attachment=7003:Bare panel.jpg] The panel looks great but as anybody following the discussions will know, it isn't easy for Julian to...	philetaylor	1 Entries 1 Comments / 3,484 Views	My front panel arrives Last activity: 26 February 2010 - 23:43
MIDIbox Live MIOS32 and Ableton Live integration continuing my midibox/liveapi project ...	ultra	1 Entries 4 Comments / 3,243 Views	continuing my midibox/liveapi project Last activity: 13 May 2010 - 17:32
j00lz - MB-6582 Build Log Started Base Board Assembly Having had most of the parts required to get started for a few months already, I finally managed to spend some time working on this project! The midibox forum upgrade seems to have come with this new blogging feature, so I thought I'd use it...	j00lz	1 Entries 1 Comments / 3,097 Views	Started Base Board Assembly Last Entry: 23 October 2009 - 08:01
Birth of a new app Witness the birth of a new mios32 application Before we begin... Purpose I am in the lucky position to be able to write my computer science degree thesis and the preceding final year project (titled "software engineering project") about developing a midibox application. This is going to be a...	lucem	1 Entries 0 Comments / 2,602 Views	Before we begin... Last Entry: 24 February 2009 - 20:45
MidiSax's Blog Midifying Saxaphone More hardware Added some more harware over the weekend. Built a very crude keyboard with 10 swithes and 2 x DIN registers on the board. Works beautifuly. Now have to start on the programing bit I suppose. Still trying to figure out how to handle the input bit...	MidiSax	2 Entries 0 Comments / 2,842 Views	More hardware Last Entry: 29 March 2004 - 08:52