Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 10/03/2020 in Posts

  1. ja danke. ich teste das ganze mal mit der 14V leitung direkt auf den mixer. danke für den hinweis. mal gucken was dabei rauskommt. und zuvor schau ich auch ob es auch ohne die mixerschaltung brummt. das netzteil ist aber letzte revision. ich kenn die diskussionen, um das netzteil. die person hat aber wohl aus den ersten Versionen gelernt.
    1 point
  2. Hi, I'm not sure i undesrtood your question well but it seems to me that you need to use the bank function. for example: EVENT_ENC id= 1 hw_id= 1 bank= 1 type= CC chn= 1 cc= 0 range= 0:127 fwd_to_lcd=1 lcd_pos=1:1:1 label= "%3d" EVENT_ENC id= 2 hw_id= 1 bank= 2 type= CC chn= 1 cc= 1 range= 0:127 fwd_to_lcd=1 lcd_pos=1:1:1 label= "%3d" EVENT_ENC id= 3 hw_id= 1 bank= 3 type= CC chn= 1 cc= 2 range= 0:127 fwd_to_lcd=1 lcd_pos=1:1:1 label= "%3d" EVENT_BUTTON id= 4 fwd_id= LED:4 type= Meta meta= SetBankOfHwId:1 range=1:1 button_mode= OnOnly # "Bank 1" EVENT_BUTTON id= 5 fwd_id= LED:5 type= Meta meta= SetBankOfHwId:1 range=2:2 button_mode= OnOnly # "Bank 2" EVENT_BUTTON id= 6 fwd_id= LED:6 type= Meta meta= SetBankOfHwId:1 range=3:3 button_mode= OnOnly # "Bank 3" In this example, when you press a button, it activates the corresponding EVENT_ENC and deactivates the others. Is it what you're looking for? Cheers, Thomas
    1 point
  3. Ja das kann zwar iriitieren, ist aber normal weil Pin 4 und 5 beim C64 verbunden waren Es gibt C64 Netzteile, die 5 V Gleichspannung auf Pin 5 und welche die sie auf Pin 4 liefern. Laut Schaltplan sind Pin 4 und 5 direkt nach der Buchse miteinander verbunden. Es genügt eines der beiden Pins mit Spannung zu versorgen. https://www.c64-wiki.de/wiki/Netzbuchse
    1 point
×
×
  • Create New...