Leaderboard
Popular Content
Showing content with the highest reputation since 10/22/2009 in Images
-
4 points
-
From the album: GMAprogrammer: MA4PC a Midi Lighting Controller
The last few days where very frustrating cause of many bugs that apeared during the assembling of the lighting desk. Thanks again to TK who gave me the Input which helped me to overcome this issues. Some of them are still there but they will be solved after i put it through some Testgigs. For Backup there will be always another Lightingdesk connected in a Fulltracking Session next to my MA4PC.3 points -
From the album: Barcode's Stuff
The enclosure came in on Thursday and finished building it on Friday! Woohoo!3 points -
2 points
-
2 points
-
From the album: OLRE16
Now with its 512 RGB leds2 points -
2 points
-
2 points
-
2 points
-
From the album: OLRE16
First ring is gradation from green to red with its step index in white Second blue to red, step index off2 points -
2 points
-
2 points
-
2 points
-
2 points
-
2 points
-
2 points
-
From the album: Hawkeyes MB stuff
(panel not properly attached yet, just a teaser! :-))2 points -
From the album: Altitude's pics
Max525 Aout module with gate buffer/adjustable level shifter2 points -
2 points
-
2 points
-
From the album: My DAW Controller project "DRAGONXT"
This is the real deal. My design printed on a sheet of aluminium 300x200mm for about $28. The texture is great, the finish is matt and looks quite professional in my opinion. My only reservation towards this approach is that colors from screen and the finished product differs quite alot. Now the next thing is to drill the holes for the components.2 points -
2 points
-
Too bad I missed that last Waldorf knob buy, but it still looks pretty awesome, IMHO. This thing came out amazing. Thanks so much TK and MIDIbox for all your work on this. Thank you to the community here too, who helped me at each step of the way that I found a way to mess up. Seriously, I'm gonna get a lot of great use out of this box. I'm looking forward to trying another one soon.2 points
-
From the album: Barcode's Stuff
The first version of my budget enclosure for the SEQ. The overall height of the enclosure will be 46mm. Mounting hole are for the LPC17 Core, AOUT NG, and the Quad IIc_Midi. The current design quotes at $46 USD.2 points -
1 point
-
1 point
-
1 point
-
From the album: The HAARP
The white spacers are 6mm but can be reduced to 2 or 3mm... The global depth with connectors is less than 50mm!1 point -
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
1 point
-
From the album: Elektruck
My TPD board together with my CV-Gate outputs from SeqV4 in a eurorack module next to MIDIbox SDCard sampleplayer module. As you can see the TPD board and CV-Gate outputs are connected to my SeqV4 by the same 25 pins D-sub cable.1 point -
1 point
-
1 point
-
From the album: esher's midibox sid
Control board, not finished yet (missing 1 encoder and wire bus to DIN/DOUT)1 point -
1 point
-
1 point