Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation since 02/21/2021 in all areas

  1. Hello Friends.. Our progress cannot be stopped. This time we really accelerate. The Fx PCB is ready. Now we has started to route the "Jeannie" mainboard. I'm curious.. Fx board Mainboard This is the first draft of the "Jeannie" mainboard. There will still be some changes such as the Teensy processor module (left). This is moved further down so that the USB socket can be used from the outside. Greetings Rolf
    1 point
  2. https://www.reichelt.de/schiebepotentiometer-stereo-10-kohm-linear-rs60n12-lin10k-p73870.html?&trstct=pol_1&nbc=1 yes they are good ones (i use them live, and move them a lot!...) The need to be snapaction knobs with a white cap with the measurements of 5mm per side. I couldn’t finde the right ones even after quite some hours of searching. Maybe I’m just searching without the right search terms? Maybe someone of you knows the answer to that problem picture? what is a snapaction knob? There is no USB port on these modules right? right! since u use a couple of 32Bit
    1 point
  3. Here's a tip for anyone who wants an easy way of having raised lettering on their 3D prints with a different colour to the case itself. Print the case with lettering with the same colour filament you want the raised lettering to have. Paint or (spray paint is probably best) the entire case in the colour you want the case to be. Then simply sand the lettering with sand paper and the original filament colour will come through. I saw this method posted in a facebook Flight Sim group where a user 3D printed his own Boeing 737 panels:
    1 point
  4. Hi! I had the LPC17 core PCB for a long time, but ordered the LPC1769 only last week. Yesterday morning when I wanted to solder the header I was surprised when I noticed (before soldering) that they don't match the one on the PCB... After reading that post, I decided to solder them, remove the black plastic holder, and bend the pin to match the already soldered(about 1 year ago...) female connector on the PCB (The header on LPC1769 were soldered not "fully inserted", so I have enough room on each pin to bend them 2 times). Here's some pictures :
    1 point
×
×
  • Create New...