tiimko

Hi I have my tech looking at my half dead midibox 6582 (bought from a user on here which is in a terrible state - bad solders, buttons are all unaligned and lots of problems in general) and he is wondering whether there is a way of getting a signal out of the SIDs without having any midi signal or any ability to use the test program listed below? Alternatively you could upload the sid_testtone application, which is available at theMIOS download page. This application just plays a 1kHz triangle wave after MIOS has been booted (no MIDI keyboard or sequencer required to play a note)

Hi I am looking for these parts to complete a fairly rough 80% MB6582 build I purchased a while back .. any help would be appreciated. ok missing parts are all referenced via Mouser.com 1 expansion port connector http://au.mouser.com/ProductDetail/TE-Connectivity/5-747913-2/?qs=%2fha2pyFadugHUBtfNKThsDThohpQIHHrkSO0Y7Waw33LRzXzL0wJ0w%3d%3d screws and nuts for expansion port http://au.mouser.com/ProductDetail/TE-Connectivity/5207719-1/?qs=%2fha2pyFaduhXL7CCAoSjOgtueNMmv7vtKkE0mh5X4MH6hsnqRSGZuA%3d%3d 8 wire connectors... http://au.mouser.com/ProductDetail/Molex/25001-0802/?qs=%2fha2pyFadugnFqBk08L9qd47jaTPJQ8yxLb7mxTjTNf2llQDbigpBA%3d%3d crimped wires for molex connectors - need 24 http://au.mouser.com/Search/Refine.aspx?Keyword=538-16-02-0102 molex connectors - 8 of them http://au.mouser.com/ProductDetail/Molex/50-57-9003/?qs=%2fha2pyFaduh6M3JhjTACBx9nkmSSFCscSv%252b1H9nXVWZsoctKLTbrFA%3d%3d feedback pots - need 4 of them http://au.mouser.com/ProductDetail/Alpha-Taiwan/RV122F-20-15F-B100K/?qs=%2fha2pyFadujdW1NbWQvo7%252bDvzW%2fraLllQy5rO1lqm7KVYAPG2J8ztQ%3d%3d There are some empty sockets for the IC's: 74HC595 (4 sockets), 6582A (2 sockets), pic18F4685 ( 1 socket ) Any help would be appreciated, Thanks.

Ditto! I am currently using a modded c64 breadbin with Mssiah (with only one 8580) - but craving more SID channels.