Hi,
I just finished building a CORE_STM32F4 with a MIDI_IO Module. It's connected with a MB909 MK-IV board but this is another story.
I've noticed that 3V output, VDD output are @ 3V... I'd expect 3.3V ...
By the way I'm looking into this because I've having trouble with the LCD: it's unstable.
The best way to replicate: hold EDIT button, it makes at lot of message on the SPI, after few seconds the DOGM display becomes full white.
The core is supplied with a 2A PSU. The sofwatre doesn't crash, can see SPI messages after LCD "crash".
Anyway, the question is:
3V core pin, VDD core pin: are they normal @ 3V or they should be @ 3.3V (at least VDD @3.3V) ?
This document is confusing me:
http://ucapps.de/mbhp_lcd.html
this PDF:
mbhp_lcd_dogm128_mios32.pdf
it talks about the 3.3V but it's unclear where I can get it on the STM32.
Thanks