Jump to content

macsaif

Members
  • Posts

    128
  • Joined

  • Last visited

Everything posted by macsaif

  1. Here is my concept. Do you think I need something more (see my 1st post)? Frank midobox.pdf
  2. Thank you for reply. I want to have normal velocity response on both manuals because I plan to use it with Gemini module. In that case maybe it is better option to connect the upper manual to a separate board. It will not have any other functions just scan the upper keybed and convert it to midi. Gemini module has 2 midi inputs. The Midibox will handle the lower manual and the functions I have mentioned in my first post. I hope it will be not a problem to handle all the buttons and the 73 key keyboard with the normal velocity response. I have Tp80 with 73 keys and ribbon cables. At the moment it is used for single manual keyboard (it is connected to the control board of an old master keyboard). It works however I do not like the functions of the original controller, this is the reason why I want to build the new 2 manual controller. Frank
  3. Hello, I want to build a 2 manual controller for My GSI Gemini module. The configuration should be as follows: 1. Upper manual - 61 key Fatar TP80 - possible to send MIDI data on channel 1 or 4 - possible to work in Velocity ON and Velocity OFF mode (in that mode when key hits the first contact it will send note on message with velocity value 127 - used in organ mode) - Octave Up/Down 2. Lower manual - 73 key Fatar TP80 - possible to send MIDI data on channels 1, 2, 3, 4 (max. 2 channels )in single, layer or split mode (split point selectable) - possible to work in Velocity ON and Velocity OFF mode (in that mode when key hits the first contact it will send note on message with velocity value 127 - used in organ mode) - Octave Up/Down in each layer 3. One Pitch wheel assignable to channel 1 or/and 4 4. One Mod wheel assignable to channel 1 or/and 4 5. One Sustain switch assignable to channel 1 or/and 4 6. Two Expression pedal inputs (Channel 1 and 4) 7. 44 analog inputs for pots (9+9+2 drawbars, 2 volume, 22 other pots) 8. 50 LED buttons (8+8+4 for bank/patch selection, 4 for percussion, 2 for vibrato, approx.24 other) 9. The controller should be able to store 8*8*4 patches with approx. 100 parameters per patch 10. 2 Midi Outs from the board Is it possible to make this application by Midibox? Which core do you recommend to use? Which modules (configuration) I have to use? Thank you in advance! Frank
×
×
  • Create New...