Jump to content

tedysuwarnady

Members
  • Posts

    62
  • Joined

  • Last visited

Everything posted by tedysuwarnady

  1. Where j10 a j10b control surface ports?
  2. thanks for the time and attention I am a less experienced midibox user, in indonesia, i have built a system midio128 control midi keyboard / organ controller modification organ and button panel button with stm32f4 will and i have followed all the instructions from de ucaps also but when i input hex bootloader filehttp://www.ucapps.de/index.html?page=mios32_bootstrap_newbies.html, also hex midio v3 .19 on lcd 2x 20 has not appeared as in the picture like this, but i have set it like the one in for midi player via sd card module please help it especially regarding mios 32 hex file for midio 128 v3 http://www.ucapps.de/mios32_download.html bundle package like the one in hex seq 4 file for sequncer as i have explained and i sent the picture through this midibox forum this video update :
  3. I apologize for my mistake I am a new and english midibox user with this bad I like that I have to say before him that I have built stm32f4 based following my post with the picture to build midio 128 as in this picture, and this is my test forum: 

     

    midio128_v3_cs.thumb.jpg.bd8e71ca9959ebbb6735ab30b35bbcd5.jpg

  4. how to geti want like this set stm32f4 disc for mbng core with scs
  5. Do you have scs oled lcd for midi ng /midio128 pcb file
  6. tedysuwarnady

    IMG 1882

    Can you share yourvpot pcb
  7. tedysuwarnady

    Aftertouch

    Do you have pot board pcb brd file
  8. Are used pic base core 2x20 lcd?
  9. Ofcourse its store on mios terminal but Still wont to work my lcd
  10. when take system on mios terminal
  11. on mios studio [6138.770] Application: MIDIbox NG V1.036 [6138.770] MIDI Monitor: disabled [6138.770] MIDI Monitor Filters: enabled [6138.772] MIDI Monitor Tempo Display: disabled [6138.772] Print AOUT Config: TODO [6138.772] lcd_type: 0x00 - CLCD [6138.772] lcd_num_x: 2 [6138.772] lcd_num_y: 1 [6138.772] lcd_width: 20 [6138.772] lcd_height: 2 [6138.772] Event Pool Number of Items: 198 [6138.772] Event Pool Allocation: 8636 of 65536 bytes (13%)
  12. i have built the stibl stc32f4disc midibox correctly and after upload mios studio hex program also seq v4 already appear on my lcd 2x20 with brand not hd447780 (hitachi) but i try to insert mb ng through mios not show in my lcd i please give in suggestion , whether the lcd does not match the driver in mb ng or there is a system that must be in input as shown in my picture
  13. Ues just verticsl bar help me please
  14. I, sorry my stm32f4 not disply after flash mb ng firmware
  15. Upload seq v4 ok but mb Ng LCD ?
  16. can you give me share new waveshare breakout brd files

  17. I built midio 128 old version base PIC16F877 ,20 Mhz crystal make me compuse capacitor detaail value near cristall c1 c2 ? midio128_core_pcb.pdf
  18. any ideaplease formidi keyboard controller espesially for61 keycontact pcb
×
×
  • Create New...