imaginarion

Done!

About midi speeching box here!

Thank you!

If anyone has the opportunity to suggest in which file I can put Sam's code so that I can try to do something with it further, it would be great!

thanks for the answer! I'm afraid it's not in my power to work with code. Maybe one day someone wants to make a 5th speech engine for MiOS

Hello everybody! Is it possible to integrate a generator into Midibox SID v2 SAM? If I understood correctly, then Comodore had these algorithms inside of them. It would be great to be able to do hardware synthesis like in the original compdore https://github.com/s-macke/SAM

Hello! If there is an ACID player that reproduces seed music using the midi protocol, then probably there should be a tracker that allows you to make such music using the midi protocol? Does anyone know such? I only found DefleMask, inside which you can make a composition for the Commodore and then run it on chips, but this is a bit different.

Hey! Snc function does not work correctly in my SID v2. When Sync is off - Arp starts at sthe same time with sequencer, but if Sync is on - arp starts playing strangely when you press a key. It seems that it does not sync with the first pressed key, but plays by itself, and pressing the key only opens the gate, while the arp plays regardless of the press. Because of this, if the sequencer starts one beat earlier - later, or in general for an arbitrary amount of time that differs from arp - asynchronization appears. Has anyone had similar problems?

Thank you very mach for this! Do you have any information if it is necessary to translate the sid v2 song mode, or is it not required? Best Regards, Pavel

Hey! I have midibox SID v2 with 6581 and 8580. Is there a way to play acid64 files using midibox sid? Best Regards, Pavel

Good day, Thorsten! Do you know, why the volume of SID getting down obout 5 dB, when activate filter section ? Best regards, Pavel

I have 2x20 display. When i switch to bass engine, i see presets for Knob's - Attack, delay, sustain, release... Ok, Thorsten, thank you very much! Best regards, Pavel

Hello! Now the rotation of the modulation wheel is correctly. But the headers of the assigned pots do not inherit the names of the parameters to which we assighn them. Its looking like this now: SID_KNOB_SetValue bsf CS_STAT, CS_STAT_DISPLAY_UPDATE_REQ SET_BSR SID_BASE movwf SID_KNOB_NUM, BANKED ; will be needed again later rcall SID_KNOB_GetPtr Best reagards Pavel

I want that the patch that I last modified before power down, to start the next time it is power on.

Thorsten, your support is fantastic! Thank you ! Another question, please: when i switch off SID, he dont memorized last preset. Is it amenable to adjustment? Best Regards, Pavel