TK.

Administrators
  • Content count

    15,121
  • Joined

  • Last visited

Everything posted by TK.

  1. Unexpected label behaviour

    Problem was, that earlier versions didn't support labels with more than 40 characters, and the corresponding error message caused the crash. The error message is working now, and I've increased the max label size to 128 characters: http://www.ucapps.de/mios32/midibox_ng_v1_037_pre12.zip Best Regards, Thorsten.
  2. Unexpected encoder behaviour

    This issue should now be fixed in http://www.ucapps.de/mios32/midibox_ng_v1_037_pre12.zip Best Regards, Thorsten.
  3. Sammich kits on eBay -- legit or bootleg?

    Unfortunately I can't check this so easily, because I would have to unmount the frontpanel PCB - but I don't think that such a typo would indicate a bootleg. The PCB color looks identical to the original one. Best Regards, Thorsten.  
  4. Unexpected label behaviour

    This should work... will check this tomorrow. Best Regards, Thorsten.
  5. Unexpected encoder behaviour

    It's related to the NRPN optimization which only sends out 99/98 when necessary - the SysEx stream based NRPNs bypasses it, therefore the problem. I will think about a solution which can handle this configuration properly... Best Regards, Thorsten.
  6. MIDIbox SEQ V4 Release + Feedback

    @lukas412 I remember that I got increased noise when the module is supplied from MBSEQ, therefore I jumpered it so that it's supplied from the 4ms pod PSU Best Regards, Thorsten.
  7. Change Main Encoder Function

    Hi Pavel, yes, this should be possible. In cs_menu_buttons.inc you've to define a new CS_MENU_BUTTON function, and program what you need. It has to be registered as a DIN_ENTRY in your setup_*.asm file Best Regards, Thorsten. 
  8. I got some PCBs - hurray! :-) And while testing them, I found a bug in the WS2812 driver, which falsified the colours, and also influenced the colours of other LEDs - a very stupid one! Here an updated version: http://www.ucapps.de/mios32/midibox_ng_v1_037_pre11.zip Best Regards, Thorsten.
  9. WS2812 driver problem

    Found the bug - fixed! :) Best Regards, Thorsten.
  10. Save and recall sysex strings

    Here the example: NGC: https://github.com/midibox/mios32/blob/master/apps/controllers/midibox_ng_v1/cfg/tests/runscr6.ngc NGR: https://github.com/midibox/mios32/blob/master/apps/controllers/midibox_ng_v1/cfg/tests/runscr6.ngr Since in the NGR script the new "range" feature is used, you've to try it with the latest MBNG version Best Regards, Thorsten.
  11. Save and recall sysex strings

    I think that this could be somehow solved by using ^dump in combination with sysex_pos for individual dummy events which collect the characters - the characters then have to be print out conditionally, e.g. based on another dummy event which stores the selected channel. Best Regards, Thorsten.
  12. Save and recall sysex strings

    Hi Chris, you could just define multiple EVENT_RECEIVERs, listening to incoming SysEx, matching on certain bytes which indicate which channel is addressed, and then store the value into ^val E.g.: EVENT_RECEIVER id= 1 type=SysEx stream="0xf0 0x11 0x22 0x33 0x00 ^val" EVENT_RECEIVER id= 2 type=SysEx stream="0xf0 0x11 0x22 0x33 0x01 ^val" EVENT_RECEIVER id= 3 type=SysEx stream="0xf0 0x11 0x22 0x33 0x02 ^val" EVENT_RECEIVER id= 4 type=SysEx stream="0xf0 0x11 0x22 0x33 0x03 ^val" In a NGR script you can access the received values with (id)RECEIVER:1 ... (id)RECEIVER:4 Which means for your NGR script: if you switch to another channel, just take the corresponding value from the receiver and display it. Best Regards, Thorsten.
  13. There is a trick which might help here: a SysEx stream can also send "common" events, which means: we can just put all CCs into a single String. Example: EVENT_ENC id=1 hw_id=1 label="@(2:1:1)Attk " enc_mode=Inc01_Dec7F if_equal=0x01 type=SysEx stream="0xbb 99 0 98 23 96 1" EVENT_ENC id=1 hw_id=1 label="@(2:1:1)Attk " enc_mode=Inc01_Dec7F if_equal=0x7f type=SysEx stream="0xbb 99 0 98 23 97 127" Best Regards, Thorsten.
  14. An example setup for this use case can be found here: https://github.com/midibox/mios32/blob/master/apps/controllers/midibox_ng_v1/cfg/tests/conev_1.ngc # send CC#96 if value is incremented EVENT_ENC id=2000 hw_id=2000 enc_mode=Inc01_Dec7F if_equal=0x01 type=CC cc=96 lcd_pos=1:1:2 label="Enc INC" # send CC#97 if value is decremented EVENT_ENC id=2001 hw_id=2000 enc_mode=Inc01_Dec7F if_equal=0x7f type=CC cc=97 lcd_pos=1:1:2 label="Enc DEC" Best Regards, Thorsten.
  15. understanding the .ngc code

    In MBNG it's a soft-option written into the NGC file: AINSER n=1   enabled=1  cs=0  num_pins=64  resolution=7bit   which allows to set the number of pins Best Regards, Thorsten.
  16. "No free token memory"

    Ok, then please try this version: http://www.ucapps.de/mios32/midibox_ng_v1_037_pre10.zip It allows to specify ranges, e.g. with: set_active (id)ENC:1..4095 0 all encoders will be set to non-active state Best Regards, Thorsten.
  17. "No free token memory"

    Hi, linking this information with your proposal for "bulk operations", and it makes sense ;-) Would "combined" set_active help to reduce the number of commands, or are there other commands which are repeating a lot? Best Regards, Thorsten,    
  18. understanding the .ngc code

    Important: when you are experimenting with NRPN, please use the latest version which got a fix for the NRPN numbers: http://www.ucapps.de/mios32/midibox_ng_v1_037_pre9.zip (I will release this soon to make the changes official) Best Regards, Thorsten.
  19. midiphy Eurorack Expander Modules

    Thanks for the valuable feedback! yes, by intention I wanted to keep the procedure "as is". Best Regards, Thorsten.
  20. MIDIbox SEQ V4 Release + Feedback

    @sis.tm concerning MacOS update: I will observe this - once I got more indicators what could go wrong there, I will try to safeguard the upload. There are already some measures (e.g. checksums and handshakes), but it seems that this isn't enough. Otherwise: sometimes patience is a virtue - hopefully Apple will fix this. Concerning CV modules: just tested at my side. No ground hum, and no noticeable noice. Only if I extremely amplify the audio signal in my DAW, I can notice some digital noise (at an ignorable -80 dB level) which disappears if I disconnect CV and Gate, but definitely no hum. The system: MBSEQ is connected via a externally powered USB Hub to a MacMini 2012, a "Kraftzwerk" is connected to the CV interface, and Audio is connected to a Firestudio Mobile. Best Regards, Thorsten.
  21. MIDIbox SEQ V4 Release + Feedback

    Hi @sis.tm this is interesting! I noticed a similar effect some weeks ago, first download was incomplete. Since neither the bootloader, nor MIOS Studio have been changed, my conclusion was that it's either related to my USB Hub, or a MacOS update. Are you also using MacOS "Catalina" (10.15)? Best Regards, Thorsten.
  22. MBCV2 Levels

    I think that you mis-interpreted the LFO function of MBSEQ To the configuration: once you store the "global setup" in the SAVE page, you could also edit the values directly with the edit function of MIOS File Browser (I think the file is called DEFAULT.CV2, search for it) - I'm doing the same, much faster :) Best Regards, Thorsten.
  23. MIDIbox SEQ V4 Release + Feedback

    I need more input to help on this. Last time you tried v096_pre9, and this version seem to work at your side, right? Older versions are archived under: http://ucapps.de/mios32/backup/ so, you could try the archived v096_pre9 again - is it crashing as well? And in case it is crashing (maybe because you are using a feature which wasn't tested by myself): which of the pre* versions doesn't cause the problem? Best Regards, Thorsten.
  24. MIDIbox SEQ V4 Release + Feedback

    Sine is a bipolar triangle, and triangle only used the positive range At the time I implemented this, I found this sufficient Best Regards, Thorsten.
  25. MIDIbox SEQ V4 Release + Feedback

    MIDIbox SEQ V4.096 has been officially released under http://www.ucapps.de/mios32_download.html ChangeLog: MIDIboxSEQ V4.096 ~~~~~~~~~~~~~~~~~ o Only for MBSEQV4+: support for up to 32 CV outputs (and corresponding gates). Means: up to 4 AOUT modules can be chained. Tested with MAX525 (and midiphy Eurorack Expander), but should also work with TLV5630 based AOUT_NG The additional CV outputs can be accessed with MIDI port CV2..4. o AOUT port has been renamed to CV1..CV4 o Utility Page, GP Button #11 now changes to the CV Configuration Page o DOUT_1MS_TRIGGER in the MBSEQ_HW.V4 file has been replaced by a configurable trigger width which can be adjusted in the CV Configuration Page with GP13 now o Improved selection handling for midiphy frontpanel: - if you press&hold the Bookm/Step/Track/Param/Trigger/Instr/Mute or Phrase button, and then make a selection with SEL or GP buttons, the selection button will jump back to the previous function - if you press&release these buttons without a selection, the function stays active. Example: let's say the track selection is active. Press&Hold Param button, change to a new parameter layer, then release the Param button -> the selection buttons will jump back to track selection. If it's desired to permanently control the parameter layer with the selection buttons, just press&release the Param button. o It's now possible to customize the list of labels which are used during track/pattern name and category and drum selection. After booting the new firmware, following files will be created in the /PRESETS folder: TRKLABEL.V4P, TRKCATS.V4P and TRKDRUMS.V4P Edit these files with the MIOS File browser. Uploaded changes are immediately taken over. - TRKLABEL and TRKCATS: are used in MENU->EVNT, "Trk Inst.", "Edit Name" page (Use GP15 to select the Preset) - TRKDRUMS is used on the same page when a drum track is edited (instead of a track name we configure instrument names) Special treatment: TRKDRUMS.V4P also maps MIDI notes to the drum labels. Whenever a new preset drum is selected, the drum note will be changed accordingly. This allows you to fully customize drum maps. The first 16 drums are taken by default whenever a drum track is initialized, and the remaining drums in the list can be optionally selected to replace on of the 16 drum instruments. - TRKLABEL and TRKCATS are also used when a pattern is saved o New option 9/33 allows to unmute tracks on pattern changes o New option 14/33 allows to change the steps of the current selected view only o the MIDI mixer can now send CC values to a bus. This especially allows to record CC changes (configure MENU->MIDI->Port accordingly so that it listens to the bus in Jam mode) o New parameter layer "Ctrl" allows to change track parameters as documented in the doc/mbseqv4_cc_implementation.txt table (previously this was only possible from a dedicated loopback track). o Recording function considers "Ctrl" layers as well if the assigned parameters are changed on the UI o CV Calibration in CV page: special handling for Hz/V curve o CV Calibration in CV page: press GP7 button to switch between bipolar/unipolar display o fixed "lost button mapping" issue if SD Card is removed o MBSEQV4+: fixed MIDI export crash Best Regards, Thorsten.