Dimitris_FX_freak

I had this idea when I realised that the Panasonic motorfaders are useless in the LC emulation(not touch sensitive). So i though that instead of the motorfaders to have another 8 encoders that means 17 in total. My querry is firstly are there 8 available spare connectors for the encoders and last does that need changes in the code? Thanx

Hello every1 I connected the buttons as seen in the pdf (eg: default) and I get something very strange. That is the first button was supposed to be REC READY but instead is SELECT Any clues what I am doing wrong?

Hi everybody I ll be quick: Can I use 1N5819 instead of 1N5818 for the 32 diodes on the MF module? This is the only schottky's I come across here in Greece. :-/ Thx

Hi everyone its been a long time since my last post... To the point: I have to solve the following I have a USB to Serial cable but the serial is DB25 Does anyone know what is the cabling to make that DB9 Best regards PS We await all of you in Greece for the Olympics :D

Hi everyone its been a long time since my last post... To the point: I have to solve the following I have a USB to Serial cable but the serial is DB25 Does anyone know what is the cabling to make that DB9 Best regards PS We await all of you in Greece for the Olympics :D

I just wish they still had that 240*64 GLCD ::)

Any ideas where can I buy a 240*64 GLCD with KS0108? Thanx

Instead of send in it to Ian just send it to Thorsten and ask him to upload it in the site. More ppl will benefit ;) me too as well ::) Dimitris

Can I order one ? ;D

Today I came across a Hitachi LM258 XNB 240*64 GLCD. The chips that were installed was LC7940 from Sanyo. My querry is if this display is KS0108 compatible? Thanx Dimitris PS You can find all the controller infos at: http://www.pacificdisplay.com/lcd_ics.htm

Yeah I saw it but I had send the post anyways thanx I expect some email from Pearl to sort out the payment deteils

The price seems to be right contact me through email to arrange the money transfer Thnx PS is it the classic green or different colour?

Hello everyboby I ve been away for few of months but now I think I should finnish tha LC Emu. The only problem is that I can't find any G-LCD in Greece so I have to order from EC or USA. I tried reichelt as T suggest but couldnt find the 240x64 KS0107-8 display from displaytech. So any suggestions will be really helpfull. If I use 128x64 I will be able to see everithing? Thanx PS Its to [glow=red,2,300]HOT[/glow] down here 8) 8) 8)

Stay tunned 12 users 7 Guests, 5 Users Dimitris, Eierbaer, sidysm, RAF, Stigmata

After some research on Panasonic faders i come up with: http://www.panasonic.com/industrial/components/potentiometers.htm Check the Slide Potentiometers/EVA(B)NL/EVA(B)NC which offer: Compact and 3-track version available — servo, touch sensor and audio. The only thing is that I cant find them anywhere in Europe so if anyone knows a Panasonic dealer who can do less than 10 pieces I would like to make an order :) Regards Dimitris PS. STOP WAR make music :-/

I come up with this link from Russia: http://www.geocities.com/smetanko/usbk_ind.htm Might be usefull might not ::) The think is it got a lot of code and schematics for PIC to USB Regards Dimitris

Ok I am not that familiar with assembly, neither with digital electronics ferther than Ohms law so I think I am stack on some point. Building a LC emulation with MIOS. As I see in the tables.inc of the LC application I only see registers The addresses 0x00-0x0f reffer to first DINX module or the first 16 pins of the first DINX. Same goes for DOUTS etc. It might sound silly but I am really confussed  ??? ??? ???

Hi Uclaros Make that order and you will get them for free. [tt]Item: PIC18F452-I/P Quantity: 3 Ship Date: 03/11/2003 Shipped From: Microchip Thailand Sample Whse (FBS) Carrier: Federal Express INT'Priority (FXI) [/tt] The only think is the time required about a month... :(

Well done Thorsten, I think the configuration with two 2*40 LCDs is better but I think is cheapper to get one 128*64 :) Got to do some research. I already got most of the parts around my deck to build up an LC I only have some (a lot maybe) questions: The split mode for encoders: how many encoders support? Is there a particular way of cabling all the DINX4 together to achive the right orientation of mute solo etc? Ok enough questions for today... ;) Regards Dimitris

Thats a very good price!!! I think I' ll go wth 2*2x40 looks better than the fancy blue graphic LCD. Regards

Ok Thorsten everythink is clear now. The mistake was mine assuming that for buttons I was requiring DOUT ??? Anyways my mistake :-/ Thanks again

Hi Thorsten I just show that picture and I got to ask if you are planning to release support for two 2x40 LCDs for the LC? Best regards

Å÷ù óôåßëåé ôï ôçë. ìïõ áí èåó åðéêïéíþíçóå ìáæß ìïõ ãéá ôï 16F877.

I am a little bit confused. ??? In an earlier post I made a question about the required modules and Thorsten had replied with ok but as I see now things are different ??? The post: http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=concepts;action=display;num=1040508092;start=15#15 I wrote : Thorsten replied The comfusion is all about the number of DINX and DOUT modules needed. Maybe I have to wait to see the upcoming documantaion which probably answer my silly question :-[ Regards

Ãáé áõôï åßíáé ôï ìáãáæÜêé óôçí êáííéããïò. Ãí èåò ãéá íá ìçí ÷ñåùèåßò ðïëëá ìðïñåßò íá êáíåéò ðáñáããåëßá óôïí Chris Electronics ï ôýðïò ìáæß ìå ôá PCB äßíåé êáé üëá ôá åîåñôÞìáôá (resistors capacitors etc) êáé ôá ìüíá ðñÜãáôá ðïõ ðñÃðåé íá âñåßò åßíáé encoders êáé ôï êïõôß. Ãáíôùò áí äåí èåò íá êáôáóêåõÜóåéò ôï PIC Programmer ìðïñþ íá óïõ ðñïãñáììáôßóù ôï PIC öõóéêÜ äùñåÜí. Ãóï ãéá ôï MIOS êáôáñ÷Þí ÷ñçóçìïðïéåß PIC 18F452 êáé ôï ðñþôï ìïõ midibox èá åßíáé Ãíá áêñéâÃò áíôßãñáöï ôïõ Logic Control ôï ïðïßï åßíáé ôï êáëýôåñï interface ãéá logic cubase ãåíéêÜ ãéá ïðïéïäÞðïôå sequencer.