cube-c

Hi, I am selling a MIDIbox SEQ V4 Lite front panel (Schaeffer AG) with a fully stuffed PCB. Front panel dimensions: 267 mm x 110 mm Price: 30 EUR + (international) shipping costs Location: Switzerland Cheers, Dan

Hi all, Spring time is cleaning time... I am selling an assembled and working MBHP_AOUT_LC_V1 board. I purchased this kit from Mike's Midi Shop about 3 years ago and used it once or twice. I don't need it anymore, so maybe it is useful for a fellow midiboxer :) Price: 10 € + shipping costs (Switzerland -> European countries) PayPal is accepted. Best regards, Daniel

Ah, that's the point. I built one using this crystal type. I made a test in a c64 and swinsid outputes only random noise. So I have to replace the crystal with the osc... Thanks TK

-swapped-

Hi all I don't need my OPL3 module anymore... It is assembled and working, stuffed with 1 YAC512 and YMF262. I'd like to trade it for an assembled SID module (8580 preferred), _of course w/o the SID_, or for 3 SID module PCBs. Photos: Not a beauty but working.... :) Please PN me and make an offer greets Daniel

>ein weiteres ist noch.. kann ich die psu für den olp3 auch irgendwie kaufen, oder muss ich die selbstmachen? Hallo Für die MB FM kannst du ein Amiga 500/600 Netzteil verwenden (wenn vorhanden, sonst halt bei den einschlägigen auktionshäuser)... das liefert die benötigten 5 / +-12V und spart gefrickel mit netzspannung :) gruss

Hallo Ich hab da vor einem Monat bestellt resp. 2x bestellt... Von 9 Sids waren 5 im Eimer! Gruss cube-c

Hi all... I just want to say that the broccoli18 pic programmer works fine. I programmed the bootstrap loader with success in the pic. For high-voltage programming I connected a 9V battery between Vpp and Ground. PGM line was not connected. The cap value I used was 0.47 uF (the lowest value that was available at the local electro-store). Check your parallel port voltage first with portdiag.exe in the programmer package and choose the appropiate resistor value (R=U/0.015). greets cube-c