Jump to content

lukas412

Programmer
  • Posts

    269
  • Joined

  • Last visited

  • Days Won

    2

Posts posted by lukas412

  1. Hello @TK. I was wondering if it would be possible to add additional clock dividers to the analog clock out. Having PPQN is nice, but being able to divide it down further would be really useful for me. In a modular a lot of time I will take 1 PPQN out and send to a clock divider module to create longer intervals. This can be worked around using the trigger out or a gate out but then you loose a track.

    thanks,

    Luke

     

  2. On 10/17/2019 at 2:36 PM, Rowan said:

    I've just had a chance to test this with 2 x AOUT_NG boards and I think I've came across a bug.

    The shift register that is assigned to CV_GATE_SR2  in the HWCONFIG file will only trigger once and then remains on. 

    I thought I had a hardware problem initially but after some trouble shooting I'm pretty confident its a software problem, either user error or a bug. The reason this is that I swapped the CV_GATE_SR assignment for SR1 and SR2 in the hardware and the problem is always present Shift Register assigned to CV_GATE_SR2.

    Both of the AOUT_NG boards are working correctly.

    @Rowan and @TK I am having the exact same issue. CV_GATE_SR2 only triggers one time and then stays on. It's not the module as I swapped two of the gate modules and the one connected to CV_GATE_SR1 always works fine. This happens with the latest release.

    thanks,

    Luke

     

  3. On 1/8/2020 at 3:18 PM, sis.tm said:

    You also use cv modules right? Do you also get noise when you connect the midibox to your computer by usb and try to record stuff in the daw? When the midibox is connected by usb I get a lot of ground hum. Just wondering if you have the same issue. Cheers Niels 

    I get this as well. I have been working through the problem with Andy, but haven't fully solved it yet. I have pretty much the same setup as @TK (4ms pod) and I get hum. Its much worse than @TK indicated his was, I see about a 20db increase in noise. I also notice that the more step LEDs I light up the louder the noise gets. I'm not even sure its ground hum. The only solution I have found so far is to use a USB cable connected directly to power and not the computer. Everything works great if there is no MBSeq -> PC connection. Another odd note is that it's some how related to the actual USB signal. In one case I was using a USB hub connected to my PC and thought I had solved the problem. Turned out that the USB cable I was using was bad and the hub was only giving the MB power, not actually connecting to the PC. As soon as I replaced it the hum came back again.

    Luke

     

    • Like 1
  4. Does anyone know what the part number for the Green LED in the Midiphy kit is? I broke one of mine and was going to order another set from Midiphy but the shipping is really steep to the USA for such a cheap part.

    thanks,

    Luke

    Edit: Midiphy are amazing I had a whole additional bag of LED's because they send you extra in the kit!

     

  5. 59 minutes ago, lukas412 said:

    Hey guys having some issues with my jog wheel module. I think my core is ok, I can load programs and scripts and connect without issue. I'm trying to test the jog wheel module and getting crazy results. After loading the seq_l script no buttons work and all LED's light up. when i touch the back of the PCB everything goes crazy. tons of input to MIOS studio and random LED's lighting up. I check each led orientation as well as the diodes and other parts. I reflowed everything with the exact same behavior. All of my parts came from the Mouser list I imported on the Midiphy site.

    thanks,

    Luke

    Ahhh! I should have read the thread I see Karg just had the same problem! Looks like I have the wrong part too.

    thanks all.

     

    Update, and of course it all works perfectly!

  6. Hey guys having some issues with my jog wheel module. I think my core is ok, I can load programs and scripts and connect without issue. I'm trying to test the jog wheel module and getting crazy results. After loading the seq_l script no buttons work and all LED's light up. when i touch the back of the PCB everything goes crazy. tons of input to MIOS studio and random LED's lighting up. I check each led orientation as well as the diodes and other parts. I reflowed everything with the exact same behavior. All of my parts came from the Mouser list I imported on the Midiphy site.

    thanks,

    Luke

  7. Hello,

    Is it possible to interact with MIOS Studio in a 'headless' manner? I am working on a Max for Live patch to create presets for the MBSeq based on the configuration of an Ableton Live Drum Rack. I would like to write the file directly to the MBSeq file system if possible. If not is it feasible? Is there a better approach I could be taking?

    Thanks!

     

    Luke

  8. 3 hours ago, TK. said:

    Hi,

    just to make it clear: not so much will change, I will continue the support and development like in the last 2..3 years, means: with ca. 20 days per year.
    But I will focus this instead of introducing new MIDIbox projects or forking existing HW/SW projects by myself.

    The license might also be more relaxed in future, but this will be announced in a separate thread in some days (please no discussion in this thread, it's too early)

    I continued the discussion about a new MBSEQ frontpanel with Andy today, be prepared for a great new solution - no, there won't be an integrated BLM4x16, but the frontpanel will look fresh and useful :) 

    Best Regards, Thorsten.

    This is such great news! Thank you.

×
×
  • Create New...