-
Posts
1,184 -
Joined
-
Last visited
-
Days Won
30
Content Type
Profiles
Forums
Blogs
Gallery
Everything posted by Altitude
-
same as I shared before, I think I deleted the project accidentally on OSHpark and someone asked about it so here it is again
-
Yes.
-
Thought I already shared this but just in case: https://oshpark.com/shared_projects/Go8GqwmI
-
http://www.mouser.com/ProductDetail/Optrex-Kyocera/C-51847NFQJ-LW-AAN/?qs=sGAEpiMZZMt7dcPGmvnkBvYnOvX7dbDNs4qVlTthfxQ%3d Id just get the OLED though
-
Mouser
-
MIDIble of the week: Ambika + MBNG synth by ilmenator
Altitude replied to latigid on's topic in MIDIbox of the Week
nice. Curious about the custom mainboard -
So what's a decent price for 3d printed buttons? Can you recommend a shop?
-
Possible new case option, without needing Heidenreich group buys
Altitude replied to julianf's topic in MIDIbox SEQ
Ok, sorry for the delay. Here's my backpanel with the holes for the current core, midi IO, line driver and IIC module. I removed the 3.5mm jack from the discovery board. seqV4 2015 TP final 9Oct15.fpd seqV4 2015 TP final 9Oct15.svg -
yeah, just got 57 notifications via email :P
-
Possible new case option, without needing Heidenreich group buys
Altitude replied to julianf's topic in MIDIbox SEQ
let me know if you need a hole layout for the new core, I have a proven panel. You need to drop the legacy core.. -
No, that's the beauty of the OLED, outstanding viewing angles. The recess thing is what it is, there is no way around it since the OLED pcb would interfere with the tact switches above and below it. Once I get a dark window on it, it will look just fine.
-
woohoo! Need to get a tinted window, those Raystars kick out
-
woo hoo! what's good for the OLED is good for the VFD!
-
About a third as thick. I am not a fan of those buy display parts, they are over priced and the quality is substandard. Kyocera has brought back some 4x20 parts (black on white/whit on black)
-
Yeah, I shared the brd file for that somewhere, I can repost it here. Never have to wire up another damn MBHP display.. That is my spare board, I ordered a set to work on this issue in particular but now I dont have to :) I have a big box of VFDs I need to try with this 8 bit driver
-
And it works! The green one is a Raystar btw. It's come to my attention that ALL of these 20x4 displays are in fact Raystar parts. I have "Newhaven", "Vishay", and "raystar" branded (which means a sticker on the back) and they are all identical
-
The driver is probably why, I have not seen that before. Will give it a whirl.
-
is the wiring different for the LCD? what did you figure out that everyone else missed?
-
YES YES YES I'm like on the edge of my seat
-
I talked to Markus so that 500 number is correct. They have no intention of this being a diy device and that's perfectly understandable.
-
MOQ is 500pcs on the new chips (2500 euro), board design is also way more complex. Kind of hard to justify a DIY version when you can buy one fairly inexpensively https://www.alyseum.com/u3-88c.html
-
that looks right, I used 11/32", you want something big that results in a large diameter to make up the for the small size of the DC power leads.
-
I use moisture seal heat shrink (it has glue on the inside) which grabs the cable VERY well, then I just use the strain relief built into the Rean DIN jack