rude bo

IMHO with mb64e firmware you can add up to 32 scratch wheels for only 1 core. B.R.

Thanks nILS ;D

Hello here is my mbswinsid project, based on atmel chip + swinsid application for sid chip substitute. 80% finished. box case, button & encoder label still on progress.. ;)

I'll burn the bootlader for free.. ;)

hello TJ I think I have one PIC18F452, which has not been used yet. so cheers up im live in indonesia too. ;D

Finaly writing the fuse bit work using HP P3 pc ;D. But the output sound litle bit noisy. I think its my power suply problem. I'll find new good power supply after my mb swindsid frontpanel finished... ;) Thanks all for the help.. B.R.

HI I'll try on my friend PC tommorow. ;) Thanks B.R

Hi swinkels sorry for late reply, im just back from holiday. Im using TDA1543, i buy it from futurlec.com. I dont able to re-program the fuse bit config. im using pony prog with stk200 simplified. It always show "device missing or invalid". Please tell me how can I re-program it? are stk200 need external vcc? and what fuse bit should i tick? here I attached the recorded testone. and sorry for my english.. thanks before it testone2.rar

this is the schematic i've made. Iam glad if somebody correct it thanks B.R

hello I build mbsid + swinsid today. im using pic18f452 with midibox_sid_v1_7303c setup_6581.hex firmware and SwinSIDX2.hex for atmega, but when I play some notes on my keyboard, i just hear some noises sound from my speaker. I build based on swinsid schematic combined with mbhp_sid_v3 schematic. any sugestion please.... sorry for my english... B.R

Me too.. ;)

hello.. so based on the SwinSid schematic the mbsid module does not need 9 / 12 volt suply . and SwinSId does not have an audio input. correct me if I am wrong.. thanks B.R sorry for my english

Hi, I build another midibox64 and have a problem. inside mb64 ini file I only found led-map assign for External bank ( 1 - 8 ). how to assign sr2 dout for External Bank (9 of 16)? ??? Thanks B.R.

@Sasha Yes the button are grey. i mount the button to stripboard. @cimo Its a custom cutting sticker. i ordered it from local car's cutting sticker. @disgustingpie Its from my broken audio speaker boxes. and thanks to T.Klose for wonderfull mios... Regards

I made the button from flexible keyboard. see here http://the-gadgeteer.com/assets/brando-flexible-keyboard8.jpg I cut it per button and glued to front panel... thanks

Its my cousin's table.. i borrow it for taking pictures.. ;D

Hello... This is some pictures of my 1st midibox based on midibox64.. I made this for ableton live controller.. & i named it IDIMOB v1. After several month reading some post on this forum, Finaly I did it.... ;D

im indonesian too mana yang laennya..... So ada yg tau tempat beli comp C64 2nd hand di indonesia..??? Pengen bgt bikin SID synth...