Zossen

Hi Leute , da Seedstudio nun den HC165 in die Liste der Bautteile aufnehmen wird, kann man nun endlich ne SMD-Platine damit löten lassen. Wenn alles klappt dann wird die kleine Platine ( 3,3cmx5cm) (6 mal DINx4 passen auf 10x10 cm) mit aufgelöteten SOIC und SMD-Wiederständen geliefert und man muss nur die Header auflöten. Hätte evt jemand Interesse an so einer Platine - weil dann würde ich nach dem ersten Prototypen mal klären was die Fertigung von mehr als 5 Stück kosten würde ? Greetz Zossen

I have ordered the wrong size ..... :( so now i have for sale 16x Encoder CAPs D-TYPE 6,35mm for sale (Sequencer Set ) Type : Knop : K85 CL17098 Cap : K85-BLK the price is 7€ + Shipping (25gr +Envelope) (Germany = 1,40€ )

Had the same - i have copied the design in parts from the 790x384sheet to different A4-sheets.

i am in for one pcb

Hi, thanks andjes you are right with the VAT i have corrected the values. And the delivery date for the new charge of knobs Type A is the 30. Week 2014 (2014-07-21 - 2014-07-27) ; Type B has a Lead time of 7 days. so i have also corrected the time.

Because i need a few Knops i am starting a new small "Group Buy" for Encoder Knobs Type - Cliff CL178812 and CL17098 (I have made this 2 Years ago for the first time.) Link to the http://www.tme.eu/de/details/k88-blk/drehknopfe-fur-drehpotentiometer/cliff/cl178812/# In my Pics you can see them in blue A the price for the knob is 0.18-0.13 € the price for a cab is 0.12 - 0.24€ so each knop with cab will cost 30 to 43 cent (depending on color and qty) For D-Type Encoders are these one B http://www.tme.eu/de/details/k85-14x18-blk-d/drehknopfe-fur-drehpotentiometer/cliff/cl17098/# price per knop 18-23 cent + cab There are Caps available in the following colors: blue, green, grey, red, white, yellow . Shipping is from Germany so payment is possible by direct transfer with Iban/BIC in Europe. shipping costs EU 3,95€ Timeframe for the delivery : deathline for order : 12.07.2014 deathline for payment : 18.07.2014 Order : 19.07.2014 delivery to me : 21.-30.07.2014 delivery to you : 2 days later (if somebody need another small part from tme just contact me) Just let me know the QTY + Color + Shipping country A 50 blue Germany B 30 16 red /14 blue Germany

2x 3 HE - each with 12x 60mm 10K Fader / Switches (with or without Faders/Switches) 2x 1 HE - with LEDs and Dip-Switches located in Berlin shipping worldwide S= 15€ for the two 1 HE Panels S= 25€ 20€ for the two 3 HE Panels (incl. 24 Fader + 12 Switches) (15€ without) S= 5€ for 24 grey Fadercaps X= searching for - 16 Encoder Caps Alps D Type and 16 Encoder-screws - lpc17 Core

Hi thanks i will check it on Sunday.

cant answer - i have no device to use them

pm send

Hi i m trying to finish my sequencer (V3 , Ultracore+ 5 Banksticks-RAM ,4x IIC Midi ), but the BPM LEDs are still not working. I'm using LED from Liteon Type LTC4624 http://datasheet.octopart.com/LTC-4624B-Lite-On-datasheet-13706875.pdf and i have made the following changes in the asm and have made a hex from it. #define DEFAULT_BANKSTICK_MODE_CS0 2 ; 64k #define DEFAULT_BANKSTICK_MODE_CS1 4 ; 64k #define DEFAULT_BANKSTICK_MODE_CS2 5 ; Mixer Map (using CS2 to ensure compatibility with Atmel EEPROMs which only provide 4 CS addresses) #define DEFAULT_BANKSTICK_MODE_CS3 1 ; Song mode (using CS3 to ensure compatibility with Atmel EEPROMs which only provide 4 CS addresses) #define DEFAULT_BANKSTICK_MODE_CS4 1 ; 64k #define DEFAULT_BANKSTICK_MODE_CS5 0 ; 64k #define DEFAULT_BANKSTICK_MODE_CS6 0 ; 64k #define DEFAULT_BANKSTICK_MODE_CS7 0 ; 64k #define DEFAULT_BPM_DIGITS_ENABLED 2 #define DEFAULT_BPM_DIGITS_SEGMENTS 5 #define DEFAULT_BPM_DIGITS_COMMON 6 Everything is like in the documentation but its not working. Has anybody a suggestion ´? thanks Zossen

I have 1x 8580R5 - MOS 1288 25 1x 8580R5 - CSG 0791 25 i got them from 2 C64's - so they are 100% real and no fakes ! make an offer