tongenerator

Hallo, ist das eine MIDIBox CV? Kommt mir nämlich auf em ersten Blick so vor? http://shop.ebay.de/i.html?_from=R40&_trksid=m570.l2736&_nkw=MIDI+to+Volt

sold, verkauft

Hallo, ich biete hiermit 11 unbenutzte Speicherbausteine an. Ich möchte gerne 10€ plus Porto meine e-mail ist: v8tx7@lavabit.com oder 01578-4685579

Hello, i want to build a midbox sequencer V3 with MIDIbox-to-COM Interface. is there anything specific i need to look at? thanks for your help. or can i send midi via usb in the sequencer V4? regards mark

war schon lange nicht mehr da.. die Fader sind schon weg... MIDI Box Kompatibel? :pinch: Ich glaube ich bau mir demnächst auch wieder eine neue MIDIBox, mal schauen :unsure:

Hallo, irgendwie werde ich die Fader nicht los... Ich hab für die Teile im Rahmen eines versiebten DIY Projekt ein haufen Kohle bezahlt. Die Fader wurden definitiv nur zu Testzwecken bewegt, heisst bestimmt keine 50 Schiebebewegungen, andere warscheinlich noch nicht mal 20 mal. Wie auch immer... Ich möchte die Teile nun los werden, macht mir am besten einfach ein Angebot... Es sind 18 Stück von diesen 10 K Lin Alps Studiofadern 100mm Weg, wo beim Conrad 30 Euro das Stück kosten... Meine Email: fso@online.de

Hello, i need to sell 18 almost new ALPS Studio Fader, they have only been used to test the channel on a diy mixer project. the faders have probably beeing moved about 10 to 20 times each, so i can garantee that they are almost new. i will sell all 18 including new Fader caps for 150 EURO plus shipping, or make me an offer. i will send out as soon payment has arrived on my bank account (Germany), no paypal. (optionaly i can make a instant buy ebay auction, so u can feel more safe) The Faders 10 K and have a sliding way of 100mm, total lenght is 13,2 cm and the screwholes are about 12 cm +/- mm Please give me either private message or email: fso@online.de

hello, i am selling my midibox sequencer at ebay... i didnt knew i need to say in this forumabout it. i just got a mail from some 1 asking me if i told in forum about it... well it is used and my only one midibox so far, but i dont need it anymore... the auction will finish tmorow at 7 oh clock in the morning... sry.. i would have told earlier if i knew

there is an update to this topic: there are now 18 ALPS RSAOK11 Fader left... i will offer them all together for 150 € plus shipping. else each 10 € incl. faderkappe plus shipping regards

Hello, i want to sell 22 Alps Studio Fader. i bought them to fix an old mitec console, unfortunatly the console is broken now. the faders have been only soldered once and testet to see if the channel works. i primarily want to sell them inside germany, ebaylike... (banktransfer then send), maybe i can also send them worldwide, but be aware of shippingcost and costoms fee i payed 25 € each... i would like to have 10 € each plus shipping. if u take all 22 fader i will sell them to u including new 20 black and 2 blue fader caps for 200 € plus shipping. those faders have actually become very rar and are hard to get for cheap price. my mail: fso@online.de on this pic you can see one of the 22

ich glaube ich habe es gefunden Im Track Mode auf Sustain gehen... werde es mal ausprobieren

Hallo, kann mir bitte jemand sagen wie ich beim seqeuncer 3 die Notenlänge einstellen kann? ich möchte eine durchgehende Note spielen aber übersehe das entsprechende Menü... vielen Dank

thanks

it toke me a while to install the compiler stuff and so on... i use openSuse... now i do have headake, lol just one more question about the *.asm file. is there anything else to change? i just want to try the J5 trigger Output within the Seqeunzer 3 thanks ;; use PORTA and PORTE (J5 of the core module) as trigger output ;; NEVER USE THIS TOGETHER WITH ANALOG POTS - IT WILL CAUSE A SHORT CIRCUIT! #define DEFAULT_ENABLE_J5_GATES 1

Hello, i have a question please. is it possible to use the aditional Trigger Outputs of the Core without having a for example Analog Out NG or so connected? How much Voltage is comming out of the Trigger? thanks

sry... i was in phrase mode... inside the songmode you can press the songmode button again to toggle between phrase mode and the actual song mode. the currently selected mode gets displayed in the first line at the second display

hello, i dont understand the song mode and how it works... i have saved 2 diffrent patterns a1 and a2 in the songmode i have tried to let them two run in sereis... so i put pattern a1 in songpostion a1 as g1 and in songpostion a2, i put pattern a2 as g1 when i press play it only plays the currently selected songpostion only when i select manualy the songposition it does changes... isnt it possible to automate the play of the diffrent song postions? regards mark

i want to make another sequenzer... with analog out is well i will never ever solder the wires on to the pins again... this just causes never ending trouble

if anyone want to see a mad midibox inside... :o it looks crazy, but i am happy that it works :D

i actually like that picture :D

grab some chips and a coke :D

as far as i know the capacitor needs to match at least the voltage that is riunning in the curcuit... if u use a capacitor that can handle more voltage it is probably going to live longer, because it is not getting stressed so much and not heat up as much... so if u need very good performance with long lifetime within a critical curcuit next to for example warm stuff, u might want higher voltage caps than actually required by the curcuit. mostly the capacitors with less voltage but same capacity are a little cheaper is well... this is some nice video.. they have many more videos that explain some stuff realy interesting :D http://www.furmansound.com/video.php?id=s1

i like the buttons and the midi i/o led`s, this is a good idea :)

the display schould be fine now... but that is actually a good point to worry about. hopefully i can shrink all of it even more to get more room in that area. the panel will still need some improvements... like "MIDIbox" and so on... i maybe agree with the SID 1 - 4 Buttons... but i wont do a stereo version... artwork? i dont even know how to spell that :D i still hope this template might can help some noobs like me as a starting point.... because i could not find any *.fpd for rack size and controllsurface so far... thanks for all the replys

i just changed something else is well... i think it looks better know http://tongenerator.spacequadrat.de/files/mysidv2_new.fpd thanks for ur tipp, i schould in fact check that... i allready used to have slightly similar problems with the sequenzer. the displays where to close at the edge, so i could not close the case anymore without modifyng it.