WingMa

They have only Rev C! Buy it or not, I only need the end legs to prepare to your place?

No need to change any resistor or something else? Just connect the two different pot and this will be work?

And how can I set what is 10 what is 5 Kohm on mios studio have no options for this

And LPC Core????

Sure? Thanks a lot Go to buy :)

I bought everything but need to know what compatible what? Thorsten no be here or I can get him... I have two MF_NG modulet and two different motor pot https://www.conrad.com/ce/en/product/442094/Motorised-fader-----5-k---------02-W-----linear-----ALPS/?ref=home&rt=home&rb=1 https://www.conrad.com/ce/en/product/442081/Motorised-fader-----10-k---------05-W-----linear-----ALPS/?ref=home&rt=home&rb=1 Can I use it one board? One is 5kOhm other is 10kOhm I need 12 60mm and 2 100mm Next I bought smashtv a lpc module with kit but don't have The LPCexpressso chip! I find this https://www.lextronic.fr/lpcxpresso/14902-module-lpc1769-lpcxpresso-board.html I know only if not A or B part I need to hack the wireing but it's absolutly campatible with how to on uccaps.de

Or this model I need a new Bootloader method?

And if it’s D only need to replace the leg with wire?

And everything works as the how to on ucapps site?

Lextronic now have this board does it the original or need some hack too? i have a lpc19_v1 board! everything work as was writes here: http://www.ucapps.de/mbhp_core_lpc17.html

Hello, does it work my smashtv lpc v1 Core??? Just a simple leg hacking?

Where can I buy now an ea-exp-003 10 years before I ordered a kit from smashtv but it doesn’t have it... :(

And if I use two usb midi converter?

Or usb only for settings not midi port?

Hy, On lpc_17 have two midi way! If I connect to the pc I have two midi input device or only one? Thanks

Or one dout board j3 goes to 8x32 button and other 3 j connector to 8x16 led?

And the dout 8x16 led 8x24?

If you are here maybe can help me! The ucapps has a pdf about button 8x16 use one dout board to! Can I extended 8x32 button?

Thank you! I manufactured the board about 2009 but now I need other and a didn’t know the original printings are ok or I need to do absolutely new! The old file name is dinx4.brd I didn’t know wich version I have a prints

Does anytime on ucapps.de dinx4_v1??? i have only dinx4.brd no version! Does any important different between v1 and v2

Because I need 12 60mm pot and 2 100mm pot my project

Thorsten tell me I can use 5K pot too but together on one board???

Please guys, Help me because I need to order the pots!!!!! Please, Regards: Bela

Hello, Can I use this two pot with your panel, and I have two panel on one I need to use all two together https://www.conrad.com/ce/en/product/442094/Motorised-fader-----5-k---------02-W-----linear-----ALPS/?ref=home&rt=home&rb=1 https://www.conrad.com/ce/en/product/442081/Motorised-fader-----10-k---------05-W-----linear-----ALPS/?ref=home&rt=home&rb=1 I need a correct answer because I would like to buy the pots Thanks and Regards: Bela

Thank you Thorsten, now I'm going to smashTV :D