pasbel
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by pasbel
-
-
Hi (Salut)
Boards on CME and ICon are the same but connectors on them are different. On icon board, there is only one connector HE10 type.
If I remenber, on CME board, there are to connectors, one HE10 type, and another one.
Here Icon board...
Weather must be better in Martinique than in Brittany... ;-)
-
Quote
I am working on my side on something similar but based on MIDIBox and Arduino "hosts" (with an external true DSP)
Cool
Quoteam working on my side on something similar but based on MIDIBox and Arduino "hosts" (with an external true DSP)
I live in Morbihan, I'il try to come
-
I knew that V-Machine worked with a linux, but I did'nt know with Wine too, I thought it use a vst host emulator only.On a "real" Windows and mini-ITX motherboard (ASRock E350M1) , I can't use correctly a lot of vst plugins witch worked with V-Machine...
I have an Axoloti board, but I'm waiting to make an enclosure to use it, I destroyed an arduino board with a teaspoon...
-
I found another one board = 6 X-Synth !
V-Machine is a very cool machine, but there is inside a very noisy fan, and too big plugins, and/or unoptimized plugins (a lot) doesn't work well.
I don't know why, but during my test, all synthmaker plugins (not synthedit, they work fine) crashed.
But for this price.it's a wonderful machine.
-
I have 5 X-Synth board, bougth 19€ to 24€... (and 1 G-Synth board)
I try one with 9v power supply and MIDI in DIN, it work, and MIDI USB too
-
I'll test that tomorrow
Thanks for your response
See image for X-Synth connector...
-
Hi Benoit
I tried to connect power supply 3.3v only (but not MIDI connection), 0v to SV2 pin 1 and 3.3v to SV2 pin 2.
USB link with a PC computer doesn't work.
I use 3.3v out from an arduino board, perhaps there isn't enougth power for X-Synth board ?
-
Hi
Thanks for all this informations.
I have an Icon X-Synth and I'm looking for your schematics.
On SV2 connector in X-synth, can I plug, on MIDI_IN_VXP and MIDI_IN_VXM, a direct cable from MIDI IN DIN connector, or from a TX pin microcontroller ?
-
Hi
It's a very old post !
What is the pinot for MIDI connection ?
The NG and the DSP...
in MIDIbox NG
Posted · Edited by pasbel
Hi
There are two X-synth board, Icon X-Synth for Icon hardware, with HE10 16 pins connector, and another one, similary to Icon X-Synth hardware (same name ?) with JST 8 pins connector for CME hardware. On my Icon board picture, you can see pinout for JST connecteur for CME.
I tested JST and HE10 connectors with ohmeter. I found GND and DIN4 and 5 on 2 connectors but not VCC. I tried to test all others pinout on my board where there are no physical connector, I don't find link too with HE10 VCC. Perhaps, the two boards use different input voltage for each hardware keyboard.
If I remenber, in the CME guide (I don't find it again), it used 2 connectors, JST and another one
Warning, I don't test it with power supply, only with ohmeter (with 0 ohm detection)