Jump to content

warpboy

Members
 View Profile  See their activity

  • Posts

    48

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by warpboy

  2. Dout r5 wanted

    in Fleamarket

    Posted

    Hello SSP,

    I'll look at the price + postage tomorrow in the morning, but what do you think if the price for the 3 boards is 15€ , is it ok for you ?

    I imagine that the price for the postage should be around 5€, but I will be sure tomorrow ;)

     

  5. Selling: CNC Engraved Midibox Panels (mbseq/mb6582/etc) & Pactec PT-10 cases (for mb6582)

    in Fleamarket

    Posted

    Hello ,

    Does someone have some news from Julianf ?

    I ve bought the last panels kit for a seq V4 on is website one month ago, but I have absolutely no news from my order :cry:

    I ve already sent two messages via the contact form without any answer.

    I can't imagine it's volontary from him, but now I have paid 143€ with paypal and I am a bit disapointed ....

    Any info would be appreciated

    Thank you

    W

  9. Seq V4 complete + seq V4 parts

    in Fleamarket

    Posted · Edited by warpboy

    hello,

    I have a fully working SEQ V4 and nice blue LCD. It's a custom box with professionnal made front panel. It comes with a wallwart psu, line driver transmitter board in the sequencer case and you can connect it to the  Aout box (not AOUT NG) with the other side of the Line driver (receiver board) . See picture : PHOTO 2

    SEQ V4 Software version : V0.95

    SEQ V4+wallwart PSU = 350€  :   SOLD

     

    AOUT BOX (with link between transmitter & receiver) 5CV & gates soldered ...others free to use = 80€

    I Can provide a psu with +12V/-12V for free  If you buy seq V4 + Aout BOX(psu coming from a dead DAT...Can feed many other machines) but not it's not a really small and compact psu

     

    Second part = PHOTO 1

    A) one other seq V4 without box . Software V0.95 installed. FULLY WORKING = 280€    ..now   180€    because I think that's a more DIY price ........ SOLD

    B) BLM 16 X 4, everything has been soldered. Quickly tested.....working but no need to use it. = 80€ SOLD

    C) LPC1769 unused = 10€

    If you buy A+B+C I give you a TPD board....not working...but with led matrix installed on connectors (not directly soldered ;)

     

    You have to add shipping at your charge.

    I can ship everywhere....

    I hope I don't miss any info ;)

     

    Best regards

    Fabien

     

     

     

     

     

     

    PHOTO 1.jpg

    photo 2.jpg

    photo 3.jpg

  11. pcbs and components for sale

    in Fleamarket

    Posted · Edited by warpboy

    hello,

    pre summer cleaning :)

    I've :

    10 x DIN boards (3 are ready to use) : 30€

    4 X DOUT boards (1 ready to use) : 12€

    1 X AOUT (only 2 ICs socket and bridges soldered)  :SOLD

    2 X MAX525 (Never used) : SOLD

    1 X MBHP DIO Matrix pcb ( ready to use) : 5€

    1 X arduino uno rev3 : 10€

    1 X AVRisp programmer  : 10€

  14. AOUT + LINE DRIVER + Gates / wilba cs

    in MIDIbox SEQ

    Posted

    Hi latigid on,

    thank you for your reply.

    It was really not clear in my head. I didn't understand the fact that we don't use one line to define each gate...

    I have soldered a jumper on J2_SI ( this one is on the Line driver transmitter between J19 and J2)...Should I use it, or not ?

    I 'm not sure that I have read it was necessary.

     

    Thank you

    I have to try now ;)

     

  15. AOUT + LINE DRIVER + Gates / wilba cs

    in MIDIbox SEQ

    Posted

    Hello,

    I'm big fan of my seq V4. I have the wilba pcb  and I'd like to use all the possibility of CV/gates

    I have already the 8cvs + 2 gates from the AOUT board and I can say this board is really working well with nice precision for CV's

    Now I'm trying to add 6 other gates for Aout CV3 to CV8

    I use Line drivers to add distance between seq and cv/gate box :

    J19 from core  linked to J19 Line driver transmitter. Line driver receiver work well with AOUT

    J2 from Wilba pcb goes to J2 Line driver transmitter . Other side , I don't have the gates 3 to 8 working on the DOUT added.

    I've tried to connect directly the Dout for the gates directly to J2 from Wilba pcb, using a led to see the pulse from the gate....with no success

     

    I've modified the hardware configuration file (using v0.92) like this :

      

    ##################################################
# CV and Gate/Trigger/Sync Setup
##################################################

# the 8 CV gates can be assigned to a shift register (0=off, 1-32: number of shift register):
# - 1st CV Gate available at DOUT SR output D7
# - 2nd CV Gate available at DOUT SR output D6
# - 3rd CV Gate available at DOUT SR output D5
# - ...
# - 8th CV Gate available at DOUT SR output D0
CV_GATE_SR3   3

    but : not CV_GATE_SR3     1       because gates 1 & 2 are coming from AOUT board, really not sure of what I did .....

     

    and this :

    #
    # NEVER USE THIS TOGETHER WITH ANALOG POTS - IT WILL CAUSE A SHORT CIRCUIT!
    J5_ENABLED 0

     

    I have other topics mostly with AOUT NG .....not sure if I can do the same with an AOUT board ????

     

    Any idea would be helpfull :)

    Thank you in advance

     

     

     

  18. MIDIbox SEQ V4 Release + Feedback

    in MIDIbox SEQ

    Posted

    Hello ,

    I'm testing the V.088 software version of the seq V4 . I'm working with sync for mute/unmute and pattern change.

    I was adjusting G4T2 for sync to measure (divider menu) and after when I go back to the track mute/unmute page, there no more sync for this parameter...

    I have to power off/power on the seq and sync mute/unmute work again for the 16 tracks...

     

    I hope to be clear :whistle:

  19. chords with aout ng & seq v4 config : multi cv operation

    in MIDIbox SEQ

    Posted

    How well is your scaling on the AOUT? Mine was not so good to my Darkenergy so I switched up to midi input...

    It's a work in progress, I really want to be free from an external midi to cv interface...

    I'll try to do some measures this week with the AOUT NG and put the result here.

    I've bought the Aout max525  from Rosch and as soon as possible I'll test it to compare.

  20. chords with aout ng & seq v4 config : multi cv operation

    in MIDIbox SEQ

    Posted

    hello Cosmosuave,

    thank you for your reply, no doubt now!

     

    I'm not a programmer but it would be fine to have the possibility to do that.

     

    I.e : in the menu page = track event configuration (menu+gp2) if you choose to play chords + out = AOUT then Aout CV1= 1 note of the chord, CV2= 2nd note of the chord and CV3=third note of the chord

     

    Easy to say, but not so easy to do :shifty:

  21. chords with aout ng & seq v4 config : multi cv operation

    in MIDIbox SEQ

    Posted

    Hello,

    I'm trying to understand how to configure correctly my seq v4 when It works with a chord-track and aout ng for poly cv operation.

     

    my actual setting is :

     

    1) track config page (menu+gp2)  : mode set to chord

                                                            port set to aout channel 1

    2) I set a A chord on the track ( = C E G notes)

     

    will I have CV1= C

                     CV2= E

                     CV3= G

    Or is there something to do to be able to play chords with my 3 analogs vcos ?

    Another solution could be to use 3 tracks of a group ( i.e = G1T1 for the first note of the chord, G1T2 for the second note and G1T3 for the third one) and to set first track for CV1, second=CV2, third=CV3 ?

     

     

     

    best regards

    Warpboy

     

     

  22. CV / Gate clarification help

    in MIDIbox SEQ

    Posted

    hello,

     

    I think DOUT gates should work with the LPC17 core

    Yes, I can confirm, I did it for my sequencer.

    Using a Dout board is nice for trigger, you're not connected directly to the lpc core !!!

    Another thing, the trigger voltage is bigger with a DOUT board(5v versus 3V for direct connection to the core)

     

    best regards

    Warpboy

  24. Seq V4 problem : stop working when I choose another pattern !

    in MIDIbox SEQ

    Posted

    hello,

     

    back again !!!!!!

     

    new session problem, I can't open/save/create..... any session, when the problem has started, I'll have a look at the info page in the midibox seq .

    Next to STOPWATCH on the right lcd I can read : Overrun

     

    SD card seems to be problematic. I try to look at the files inside with a computer but most of the time, I need to insert it two times in the sd card reader from my computer before I be able to read it.

     

    With another sd card everything is ok.......then I have copied  my session from my computer to the new sd and it's not working

     

    any ideas ?

     

    thank you in advance

  25. [FS] Core8, SID, DIN, DOUT, Ultracore, I2C DIY stuff

    in Fleamarket

    Posted

    hello Rosch,

    I'd like to buy :

     

    LPC17 Core, known to work. Normal Price that you'd pay when you buy everything.

    AOUT_NG just built, I can't remember if i tested it. As is. Material price.

    MB FM board, assembled including the SMT parts, not been tested except for no shorts. 15€

     

    2x AOUT boards one bridge soldered each, 5€

    is this the normal Aout with max525 ?

     

     

    let me know your price for these parts + shipping.....

     

    I'm in France

     

    best regards

     

    Warpboy

×
×
  • Create New...