-
Posts
48 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by warpboy
-
-
Hello SSP,
I'll look at the price + postage tomorrow in the morning, but what do you think if the price for the 3 boards is 15€ , is it ok for you ?
I imagine that the price for the postage should be around 5€, but I will be sure tomorrow ;)
-
Hello,
I have 3 DOUT R5 pcbs, never soldered.
I'm in France.
Let me know if you're still interested ;)
-
hello Jaytee,
ok, I understand ;)
I ll try to contact him on Muffwigglers
thank you for your reply :)
-
Hello ,
Does someone have some news from Julianf ?
I ve bought the last panels kit for a seq V4 on is website one month ago, but I have absolutely no news from my order
I ve already sent two messages via the contact form without any answer.
I can't imagine it's volontary from him, but now I have paid 143€ with paypal and I am a bit disapointed ....
Any info would be appreciated
Thank you
W
-
Hello Kartoshka,
thank you for your reply !
I'm interested to buy it
I'm in France. Can you give me the price with shipping ? Let me know if you need my complete adress.
best regards
Fabien
-
Hello Kartoshka,
I'm interested by the case, I don't know what could be the price as Heidenreich sells with minimum quantity of 10....
What is your price ?
Thank you
Warpboy
-
Hi Soundbot,
no problem, it's available.
I send you a PM
-
hello,
I have a fully working SEQ V4 and nice blue LCD. It's a custom box with professionnal made front panel. It comes with a wallwart psu, line driver transmitter board in the sequencer case and you can connect it to the Aout box (not AOUT NG) with the other side of the Line driver (receiver board) . See picture : PHOTO 2
SEQ V4 Software version : V0.95SEQ V4+wallwart PSU = 350€ :SOLDAOUT BOX (with link between transmitter & receiver) 5CV & gates soldered ...others free to use = 80€
I Can provide a psu with +12V/-12V for free If you buy seq V4 + Aout BOX(psu coming from a dead DAT...Can feed many other machines) but not it's not a really small and compact psu
Second part = PHOTO 1
A) one other seq V4 without box . Software V0.95 installed. FULLY WORKING = 280€ ..now 180€ because I think that's a more DIY price ........SOLDB) BLM 16 X 4, everything has been soldered. Quickly tested.....working but no need to use it. = 80€ SOLDC) LPC1769 unused = 10€
If you buy A+B+C I give you a TPD board....not working...but with led matrix installed on connectors (not directly soldered ;)
You have to add shipping at your charge.
I can ship everywhere....
I hope I don't miss any info ;)
Best regards
Fabien
-
hello Ilmenator. I'm near Paris. I can post everywhere...
-
hello,
pre summer cleaning :)
I've :
10 x DIN boards (3 are ready to use) : 30€
4 X DOUT boards (1 ready to use) : 12€
1 X AOUT (only 2 ICs socket and bridges soldered) :SOLD
2 X MAX525 (Never used) : SOLD
1 X MBHP DIO Matrix pcb ( ready to use) : 5€
1 X arduino uno rev3 : 10€
1 X AVRisp programmer : 10€
-
Really nice !!!!
-
thank you for these infos ,
I'll let you know when it works ;)
-
Hi latigid on,
thank you for your reply.
It was really not clear in my head. I didn't understand the fact that we don't use one line to define each gate...
I have soldered a jumper on J2_SI ( this one is on the Line driver transmitter between J19 and J2)...Should I use it, or not ?
I 'm not sure that I have read it was necessary.
Thank you
I have to try now ;)
-
Hello,
I'm big fan of my seq V4. I have the wilba pcb and I'd like to use all the possibility of CV/gates
I have already the 8cvs + 2 gates from the AOUT board and I can say this board is really working well with nice precision for CV's
Now I'm trying to add 6 other gates for Aout CV3 to CV8
I use Line drivers to add distance between seq and cv/gate box :
J19 from core linked to J19 Line driver transmitter. Line driver receiver work well with AOUT
J2 from Wilba pcb goes to J2 Line driver transmitter . Other side , I don't have the gates 3 to 8 working on the DOUT added.
I've tried to connect directly the Dout for the gates directly to J2 from Wilba pcb, using a led to see the pulse from the gate....with no success
I've modified the hardware configuration file (using v0.92) like this :
################################################## # CV and Gate/Trigger/Sync Setup ################################################## # the 8 CV gates can be assigned to a shift register (0=off, 1-32: number of shift register): # - 1st CV Gate available at DOUT SR output D7 # - 2nd CV Gate available at DOUT SR output D6 # - 3rd CV Gate available at DOUT SR output D5 # - ... # - 8th CV Gate available at DOUT SR output D0 CV_GATE_SR3 3
but : not CV_GATE_SR3 1 because gates 1 & 2 are coming from AOUT board, really not sure of what I did .....
and this :
#
# NEVER USE THIS TOGETHER WITH ANALOG POTS - IT WILL CAUSE A SHORT CIRCUIT!
J5_ENABLED 0I have other topics mostly with AOUT NG .....not sure if I can do the same with an AOUT board ????
Any idea would be helpfull :)
Thank you in advance
-
Hello EsotericLabs
PM sent
Best regards
Warpboy
-
Hello,
Pm sent for 2 pcb sets
Best regards
Warpoy
-
Hello ,
I'm testing the V.088 software version of the seq V4 . I'm working with sync for mute/unmute and pattern change.
I was adjusting G4T2 for sync to measure (divider menu) and after when I go back to the track mute/unmute page, there no more sync for this parameter...
I have to power off/power on the seq and sync mute/unmute work again for the 16 tracks...
I hope to be clear :whistle:
-
How well is your scaling on the AOUT? Mine was not so good to my Darkenergy so I switched up to midi input...
It's a work in progress, I really want to be free from an external midi to cv interface...
I'll try to do some measures this week with the AOUT NG and put the result here.
I've bought the Aout max525 from Rosch and as soon as possible I'll test it to compare.
-
hello Cosmosuave,
thank you for your reply, no doubt now!
I'm not a programmer but it would be fine to have the possibility to do that.
I.e : in the menu page = track event configuration (menu+gp2) if you choose to play chords + out = AOUT then Aout CV1= 1 note of the chord, CV2= 2nd note of the chord and CV3=third note of the chord
Easy to say, but not so easy to do :shifty:
-
Hello,
I'm trying to understand how to configure correctly my seq v4 when It works with a chord-track and aout ng for poly cv operation.
my actual setting is :
1) track config page (menu+gp2) : mode set to chord
port set to aout channel 1
2) I set a A chord on the track ( = C E G notes)
will I have CV1= C
CV2= E
CV3= G
Or is there something to do to be able to play chords with my 3 analogs vcos ?
Another solution could be to use 3 tracks of a group ( i.e = G1T1 for the first note of the chord, G1T2 for the second note and G1T3 for the third one) and to set first track for CV1, second=CV2, third=CV3 ?
best regards
Warpboy
-
hello,
I think DOUT gates should work with the LPC17 coreYes, I can confirm, I did it for my sequencer.
Using a Dout board is nice for trigger, you're not connected directly to the lpc core !!!
Another thing, the trigger voltage is bigger with a DOUT board(5v versus 3V for direct connection to the core)
best regards
Warpboy
-
hello,
pm sent ;-)
-
hello,
back again !!!!!!
new session problem, I can't open/save/create..... any session, when the problem has started, I'll have a look at the info page in the midibox seq .
Next to STOPWATCH on the right lcd I can read : Overrun
SD card seems to be problematic. I try to look at the files inside with a computer but most of the time, I need to insert it two times in the sd card reader from my computer before I be able to read it.
With another sd card everything is ok.......then I have copied my session from my computer to the new sd and it's not working
any ideas ?
thank you in advance
-
hello Rosch,
I'd like to buy :
LPC17 Core, known to work. Normal Price that you'd pay when you buy everything.AOUT_NG just built, I can't remember if i tested it. As is. Material price.
MB FM board, assembled including the SMT parts, not been tested except for no shorts. 15€
2x AOUT boards one bridge soldered each, 5€is this the normal Aout with max525 ?
let me know your price for these parts + shipping.....
I'm in France
best regards
Warpboy
Dout r5 wanted
in Fleamarket
Posted
hello SSP,
I sent you a PM ;)