ionas

Super! Hat funktioniert! Vielen Dank Thorsten! :)

Hallo! Seit gerade eben ist mein LPC 17 fertig. Ich glaube jedoch, dass irgend etwas faul ist … Den Bootloader habe ich auf das Expresso Modul transferiert und der LPC wird auch im MIOS Studio erkannt. Leider antwortet er aber nicht … (Siehe Anhang) Die LED des Expressos blinkt die ganze Zeit. Ist das normal? Es ist mein erstes Projekt und für den Anfang möchte ich nur ein paar Knöpfe und Regler anschließen, um mit der Materie warm zu werden … Die dazu benötigten AIN, DIN und DOUT für LED´s habe ich auch, genau wie ein LCD zu Verfügung. Ich habe schon gelesen, dass es für den Anfang sinnvoll ist, das MIDIO 128 Tool zu verwenden, damit man sich nicht selbst etwas schreiben muss. Wenn ich "Send" drücke tut sich was, aber eine Bestätigung oder Fehlermeldung lässt auf sich warten. Danke!

I installed the mios 32 bootloader (at least i think this worked). after transferring the data with the program i reconnected the lpc and the red led faded 3 times. so now i can transfer my programs via the usb port on the board? great! :-)

I´ve got a little question! I´m planning to do the same thing and there´s something i recognized … In your picture all the female sockets are on the back side of the lpcexpresso. wouldn´t it be better to solder the 8pin female to connect the other part of the expresso on the other side (as seen an tk.´s pics)? or am i getting something wrong? thanks!

Hey there! (nice pic by the way :-) ) i guess i made it. (see there: https://skitch.com/ionas-elate/ghdrm/img-1409.jpg) and it says around 3.3 (luckily) but it fluctuates pretty heavily … but i think thats because of my shitty multimeter … thank you!

Hi! I´m finally building my own LPC 17. I´m not unexperienced in soldering so i followed the guide on the ucaps page. The resolution of the pictures is very low so i don´t know, where to measure the 3,3 V. I tried to guess but i only got the full 5V … Here´s my build: LPC 17 Thanks for helping!

Received it also! Let´s solder :-)

wuhuuu i´m so excited! :D

I´m looking so forward to building my first midi controller! I hope I´ll manage it … I already saw that you published a nice how to -guide. I´m very excited! ;) Best Jonas

Good news! :-) How will you collect the money?

Thanks peefunk! I found an SD - USB adaptor and i think i will just desolder the SD Slot and connect it to the module.

Sorry if that´s a noobish question but where will be the SD card? I can´t see a slot on the picture you postetd so where will it be? Do I have to order another component that provides a card slot? Thanks!

There you go! :frantics: Order List for MBHP CORE LPC 17 (no ribbon cable because it´s not available at present …) Price: 11,13€ + shipping

Hey! How can I create a list? I think I´m going to order this evening. And i´d like to save you some time :-)

Very nice! :-) thank you for this very helpful link!

Looking very forward to this! :-) I already put my name into the list. Is that preorder just for the PCB and the MagJack or are the other components also included? PS: The parts-link to the Reichelt page does not work.

Alright, thanks! Is that Core 32 (or maybe the newest one (hope it´s gonna be released soon)) available in Germany? Good night!

Thanks Rosch! Of course i will post some pics if it´s gonna work. Mixing digital with analog sources is a no go, i know :-) I feel a little depressed right now, because i spent the whole day reading the software how to´s and i find it pretty hard to get in touch with. All i want to achieve at the beginning is sending Midi CC out of the digital encoders or buttons and LED´s that respond to incoming CC´s. I´m experienced with "normal" midi controllers as well as OSC. All I want to do first is assign a Channel and CC to a specific button. Do i have to understand all of the stuff going on here: http://ucapps.de/cmios8_fun.html ? Or are there functions in the MIOS Studio 2.2.1 software that allow me to do that once paired with the PIC (I ordered it today so i haven´t got it yet). Thank you! PS: I really like to figure out new stuff but the access to the stuff shown in the link i posted above is really challenging.

Hey! Thanks for your super fast reply! I want to do something tricky/funny … I ordered two old 5,25 Hard drives and i want to use them as jog wheels so i think i have to do some filing :-) I´m really excited. Hope I´m not getting addicted ^^

Hi! I´m also planning to build my own midi controller. It´s pretty similar to yours so i decided to post here. I´ve got a few questions: 1. Is it really not possible to have buttons mixed with encoders on one DIN board? ( I only have 16 Buttons and 2 Encoders 2. Can I buy those components in Mikes Shop? 3. I plan to use the encoders for Jog-Wheels. Is that possible? And how can i mount them? (I´ve already got disks (like a cd but without a hole and of course metal.) 4. Can I extend this setup in the future? (For instance with a AI-Board or another DI?) I think so because in available ports include connections to other D IN modules but i want to be sure :-) So my compontents would be: Core_V3 (without PIC) DINX4_V2 (for Buttons) and probably another DINX4_V2 for encoders, right? DOUTX4_V2 (for the LEDs) and of course a PIC (thought to buy a PIC18F452 for compatibility) ordered at Mike´s shop: http://www.mikes-elektronikseite.de/mshop_deutsch/