Search the Community

Parting ways with most of built and to be built DIY audio projects i kept over the years. Life moves on at its own pace, and my DIY audio box seemingly have been left for far too long unattended. Here's the ultra-rare, assembled and never plugged in Dual SSM 2044 VCF & MBHP_AOUT_NG module within plastic enclosure. Project link As you can see, these two uber cool stuffed boards were crafted with special attention to quality, true passion and a highest grade of perfection. These have their own character. Shipping from Canada or US at cost.

Started putting together the external filter for my sid. I am trying out the ssi2144. I have not seen anyone post about using one on here yet. I have the adapter boards for them. All I have to say is that is some super small soldering! I think I have them in good shape though! I reviewed the schematics and it looks like it should work ok. The ssi 2144 has slightly different recommended caps then the SSM2044. I ordered the recommended caps forom the data sheet for the ssm and the ssi I may test both to see if I hear a difference. Will likely go with the recommended caps from the data sheet. There are a few other minor resistance changes on the data sheets too but not sure if they are required I will have to see how it sounds. The adapter are from https://www.amsynthstore.co.uk/SSI2144_to_SSM2044_Adapter_PCB/p1461448_17854795.aspx modular addict sells them too but had been out of stock. https://syntherjack.net/ssi2144-to-ssm2044-vcf-converter/ also has published an file for them as well but I only needed a few of them... for 1.5 I picked up a few extra incase I broke them. If they all work may build another filter for something else. Did I mention that solder pitch is tiny!!! Here are the caps the ones on the left are for the ssm and the ones on the right are for the ssi. C19-C24 10nF, 6.8NF for SSI2144 6 STYROFLEX 10N C25,C26 820pF, 560pF for SSI2144 2 STYROFLEX 820P

Selling: 6x 4x CEM3372 - 25 EUR / pc 2x CEM3379 - 25 EUR / pc 4x SSM2044 - 20 EUR / pc 2x 1x SSM2044 PCB - 5 EUR / pc (By Seppoman) The SSMs are used. Buy two of them and you can also buy the PCB if you want. If/when the chips are sold without the PCB I can sell them separately as well. The CEMs were bought as NOS but I never got around to put them to use. If you find a problem with them I'll refund the money when returned. Ships from Finland.

Update: The box is now sold. Hello! I have sold my MB6582 and thus have no use for my 1U rack mounted eight channel PSU/VCF/VCA expansion box. It contains : PSU: 230V input. Powers all Components in the box plus the MB6582 via a cable that fits the MB6582 power input connector. DA-converters: Four nicely soldered AOUT_NG boards control the filters and VCAs. They are controlled from the MB6582 via the expansion port. Analog filters: Four SSM2044 boards fitted with eight SSM2044 chips, relays and styroflex capacitors. Audio is fed into the filters from the MB6582 via audio jacks. VCA: Two SSM2154 boards for amplitude control of all eight audio channels. VCF output is fed into VCA input. I haven't used the box for a few years. Last time I used it everything worked well but because of all wiring, the box is sold as is. You should be able to trouble shoot if needed. I can guarantee that all boards are good though! Based on historical prices for the individual boards, I am asking $800 / €700 plus shipping and if lack of interest I will sell individual parts of the build. Any suggestions are welcome. All the best, Johan

Searching for Seppoman 2044 VCF board, stuffed or not. Cheers!