Sebo Posted March 2, 2008 Report Share Posted March 2, 2008 Hi:I´m about to build a MIDIbox CV using a AOUT module, as part of a modularsynth I´m building.I have some questions:1 - I want to add extra triggers using a DOUT as described here:http://www.midibox.org/dokuwiki/how_to_use_midibox_cv_with_a_doutWill this mod work with version 1.2a of the MBCV firmware?2 - Will this mod increase the latency of the MBCV?3 - I read in a post that the AOUT PCB didn´t have the power connected to thechips and it has to be done with wires. Can anybody confirm?... and explain towhat chips.That´s all for now.Thank you. Quote Link to comment Share on other sites More sharing options...
nILS Posted March 2, 2008 Report Share Posted March 2, 2008 1 Will this mod work with version 1.2a of the MBCV firmware?Yes.2 - Will this mod increase the latency of the MBCV?No(t noticeably).3 - I read in a post that the AOUT PCB didn´t have the power connected to thechips and it has to be done with wires.* You'll need to specify which AOUT board you are talking about, as there are three different ones: AOUT_NG, AOUT_LC and the "regular" AOUT.* Could you link to the post you are talking about, please? Quote Link to comment Share on other sites More sharing options...
Sebo Posted March 2, 2008 Author Report Share Posted March 2, 2008 Hi nILS Podewski:Thank you for your reply.The AOUT I´m building is the regular AOUT with MAX525 DACs.The post I was reffering was this:http://www.midibox.org/forum/index.php/topic,10412.0.htmlBut I think I understand what TK means.I should connect +12 and -12 to both pair of pins around th TL074s, right?Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.