Jump to content

gm5x5x5 Bulk Order


nILS
 Share

Recommended Posts

Doug has the list somewhere :-)


(All measurements in mil. Center of component/hole)

pcb size:
  8800x1925
mount holes:
  150x850
  8650x850
  150x1775
  6850x1775
  4590x1000

usb socket (x):
  450

midi sockets (x):
  1200
  2000
  2800
  3600
  4400
  5200
  6000
  6800
  7600
  8400
[/code]

Link to comment
Share on other sites

  • Replies 161
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Thank you Nils, but I don`t have a idea what dimensiionsare you talking about. ???  PCB size 8800x1925? mil. as short of millimeter?

As I see you cannot publish the vector, can you wright me the dimensions I marked with letters and I`ll draw and publish the EPS?

4037_gm5_gifeaffc4740c9fc4d56399f032cfef

4037_gm5_gifeaffc4740c9fc4d56399f032cfef

Link to comment
Share on other sites

Um... Sasha... mil == 1/1000th inch. The board size is accordingly 8.8x1.925 inches. Got the concenpt? Good. All positions I listed are the centers of the components/holes with the origin being the bottom left corner. 150x850 for instance means that there's a hole at 0.15 inches from the left, 0.85 inches from the bottom. BTW - (150|850) is a vector ;-) I *could* publish a neat vector graphic I just don't see the necessity to do so as the dimensions are all you need to draw one yourself.

Link to comment
Share on other sites

Both will work. The HC18 and HC49 package only differ in how they are being created/put together. HC18 means the two parts of the package are soldered together while the HC49 package is welded using electricity (terminology?).

Link to comment
Share on other sites

Um... Sasha... mil == 1/1000th inch.

This is as opposed to the military measure of angle: which is wonderfully rounded up by NATO to 6400 mils in a circle, and the old eastern block armies who rounded down to 6000. I's supposed to make your gunnery calculations easier!

Even when I was working in inches, when I did machining work as a youngster, we never used mils as a term in the UK. We always used the term "Thou" short for "thousandths of an inch" Perhaps I'll give my next layout terms in microfurlongs.

Still, it does make more sense to me than having pins spacings set out in 2.54mm rather than 1/10"

(and before anybody starts - I do know the English have some of the wierdest measurements, like Fathoms, rods, poles, perches and chains)

Asaf might have a precedent for dimensioning his next box in cubits.....

Any other wonderful measurement systems out there?

Link to comment
Share on other sites

You could measure it in Cun ;)

Good for finding pressure points on your synths. Probably no good for laser cutting.

Edit: Oh crap I can't split posts in here. nILS you should be able to, it's your thread :)

( Sorry for the tangent Nils - could you please do the splitty thing!)

The Japanese equivalent, The Sun was standardized at 1000/33 mm

1000/33 mm = 30.30303030303030303030303030303 mm

This now has to be the official unit for measuring  x0xb0xen

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share


×
×
  • Create New...