8O Posted April 9, 2009 Report Share Posted April 9, 2009 Hi again,Hope I'm in the right forum again - did a quick search for this, but didn't find anything...Am currently assembling a DINx4 module and noticed that a bridge jumper is included to go from IC2 pin 10 to IC3 pin 9. But if I look on the underside of my pcb there's nothing in the way to prevent just a track being laid directly.So I'm just wondering why this bridge is necessary?Cheers! Quote Link to comment Share on other sites More sharing options...
nILS Posted April 9, 2009 Report Share Posted April 9, 2009 It isn't. It's most likely a remainder from optimizing the board. (Same bridge is still there between IC1 and IC2). Quote Link to comment Share on other sites More sharing options...
8O Posted April 9, 2009 Author Report Share Posted April 9, 2009 Ah yes, now I notice that the routing between IC3 and IC4 is done as I imagine between IC2 and IC3 should be... Something for V3, maybe... ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.