woozle Posted September 19, 2009 Report Share Posted September 19, 2009 I think I've tried every possible wiring configuration, but I'm not getting any output from my pot(s). I've eliminated the AIN module and I'm trying to run a single pot off of j5a. I get no midi output, only resets when I cause a short. I've followed the diagrams here http://www.ucapps.de/mbhp/auaimbctg.pdf with no luck it seems. MIOS studio registers nothing on MIDI, except on resets. Are there any photographs of pots wired up to core revision r4d alone or w/ AIN r4? I'm making no progress. Running latest 64e app. Quote Link to comment Share on other sites More sharing options...
nILS Posted September 19, 2009 Report Share Posted September 19, 2009 Try the ain64_din128_dout128_v2b app (less is sometimes more).Your pot (is it ~10k?) most likely has 3 pins (as in the attached pic). A goes to Ground, B goes to the J5 pin and C goes to +5V. If that doesn't work - show some pics!edit: whoops. forgot the pic :-) Quote Link to comment Share on other sites More sharing options...
Janis1279 Posted September 20, 2009 Report Share Posted September 20, 2009 Are you corrected the some default values for pots in the setup_midibox16e.asm file :...#define DEFAULT_NUMBER_AIN 0;; you could enable the multiplexers here to test this application; with a MIDIbox64 based hardware; if 0: no multiplexers (a *must* when MF module connected); if 1: use multiplexers#define DEFAULT_ENABLE_AIN_MUX 0... Quote Link to comment Share on other sites More sharing options...
woozle Posted September 22, 2009 Author Report Share Posted September 22, 2009 Nope, didn't enable multiplexers. That would be part of my problem, but I can still test pots in unmuxed mode directly on the core without recompiling with this flag set, right? I want to make sure I'm wiring things up correctly before I add in the AIN module. Quote Link to comment Share on other sites More sharing options...
Janis1279 Posted September 22, 2009 Report Share Posted September 22, 2009 Nope, didn't enable multiplexers. That would be part of my problem, but I can still test pots in unmuxed mode directly on the core without recompiling with this flag set, right? I want to make sure I'm wiring things up correctly before I add in the AIN module.Are you corrected the some default values for pots in the setup_midibox16e.asm file :...#define DEFAULT_NUMBER_AIN 0;; you could enable the multiplexers here to test this application; with a MIDIbox64 based hardware; if 0: no multiplexers (a *must* when MF module connected); if 1: use multiplexers#define DEFAULT_ENABLE_AIN_MUX 0...in this string:#define DEFAULT_NUMBER_AIN 0edit your pots quantity from 0 up to 8 for unmuxed mode , recompile , and pots will work. Quote Link to comment Share on other sites More sharing options...
woozle Posted December 10, 2009 Author Report Share Posted December 10, 2009 in this string: #define DEFAULT_NUMBER_AIN 0 edit your pots quantity from 0 up to 8 for unmuxed mode , recompile , and pots will work. For muxed mode, do I want to specify both the muxed flag and the number of pots or just the muxed flag? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.