Jump to content

Recommended Posts

Posted

Hi ,

After talking to the first builder of Traktorizer i started my own build :)

Here i will post pictures of the build as soon i progress , so far I etched my PCB's and done some soldering as well as programming the PIC and see it working in MIOS :)

See you soon , Mihai .

post-7629-127248749344_thumb.jpg

post-7629-127248750321_thumb.jpg

Posted

Today i finished the board .

I hit the first problem , I connected one Nokia3310 LCD useing this http://www.ucapps.de/mbhp/mbhp_lcd_pcd8544_single_mios8.pdf diagram , I loaded MIOS and got the Operation System MIOS8 from MIOS Studio but nothing is displayed on the LCD .

I then loaded Traktorizer firmware .. same .. nothing is displayed . I tryed connecting the LCD to S1 pin .. nothing .

Also after loading traktorizer firmware i see a lot of activity in MIOS studio on the MIDI IN screen , is this normal ?

Is there any way to test the LCD's ? I verifyed all the soldering and connections to the core .

Thanks !

  • 2 weeks later...
Posted

Today i finished the board .

I hit the first problem , I connected one Nokia3310 LCD useing this http://www.ucapps.de/mbhp/mbhp_lcd_pcd8544_single_mios8.pdf diagram , I loaded MIOS and got the Operation System MIOS8 from MIOS Studio but nothing is displayed on the LCD .

I then loaded Traktorizer firmware .. same .. nothing is displayed . I tryed connecting the LCD to S1 pin .. nothing .

Also after loading traktorizer firmware i see a lot of activity in MIOS studio on the MIDI IN screen , is this normal ?

Is there any way to test the LCD's ? I verifyed all the soldering and connections to the core .

Thanks !

Hi

here a quote from my homepage (latest Page updates) -> http://mte.bplaced.net/LatestPageUpdates.htm

# 24.07.2008 Traktorizer goes to Version V4.01(Beta)...LCD-Function completely removed...

Regards and sorry for the long delay

MTE

Posted

They are very good , solid cases .

Before I tryed to use a Cisco 2950 1U case but it's to small and the top is much more flexible than the Nortel case . I managed to get the SMPS from the Cisco , it's small and provide 12+ and 5+ :) the Nortel SMPS is too big ( triple size ) .

I'am working in telecom industry and have a lot of discarded networking devices , they make very good cases ( and SMPS's ) for DIY projects :)

I will post photos as soon i progress .

Mihai .

Posted (edited)

Why did you removed the LCD's ?

The LCD-Function was just a try for a gimmick, but the programming was too hard for me....Im not a programming genius :drool:

Best Regards

Edited by MTE

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...