SynGuy7 Posted May 12, 2010 Report Share Posted May 12, 2010 I'm currently building the one piece PCB for version 4 and have a number of through PCB holes left (in areas of U5 & 6 and U8 & U2), am I supposed to connect these through the board to the tracks on the backside ? I've looked through the forums and constructions details but cannot find an answer to this. Thanks :thumbsup: Quote Link to comment Share on other sites More sharing options...
findbuddha Posted May 12, 2010 Report Share Posted May 12, 2010 I assume you mean Wilba's control surface PCB? AFAIK it's not necessary to do anything with those - mine works fine. Quote Link to comment Share on other sites More sharing options...
Wilba Posted May 12, 2010 Report Share Posted May 12, 2010 I agree :thumbsup: If it isn't mentioned in the build guide, ignore it. FWIW the pads right of U6 are unused DIN inputs, not in the switch matrix. Everything else is either a via (not a pad, vias connect tracks between the layers) or it's a documented header (which you probably don't need). Quote Link to comment Share on other sites More sharing options...
SynGuy7 Posted May 12, 2010 Author Report Share Posted May 12, 2010 Thanks for the replies. I did actually zoom in on your photo of construction Wilba, but it was a bit indistinct to see if the track holes had a through connection. Time to get back to construction then. Thanks again. :thumbsup: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.