piku Posted December 8, 2010 Report Share Posted December 8, 2010 how can i configure my midibox 64 and midibox 64e to turn on leds via midi and via buttons both? can someone build a special version of the firmware with this feature enabled? if not, please give me some general suggestion about the necessary code modifications thanks Quote Link to comment Share on other sites More sharing options...
ilmenator Posted December 8, 2010 Report Share Posted December 8, 2010 Hi, this is not a big deal. As you seem to be no programmer, may I suggest that you start coding using the C language - this is much easier than changing the assembler code for MIDIbox 64. Take a look at the LED controlling example and see if this makes sense to you. If so, you should go to the WIKI to install the toolchain and start coding. It is really simple and straight forward, and what you need is easily implemented even without programming experience by just following the implementation example above. Quote Link to comment Share on other sites More sharing options...
piku Posted December 8, 2010 Author Report Share Posted December 8, 2010 i had success with the c examples.. but it's too difficult for me to enable this kind of feature in mb64e firmware Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.