Jump to content

MB-6582 base pcb - Issues **FIXED**


Moduku
 Share

Recommended Posts

Guys I need a hand troubleshooting my MB6582 base pcb.

I have done the suggested voltage and continuity tests in Wilba's PCB build guide and everything seems fine BUT:

Uploading mb6582.hex to PIC0 takes forever ( >5000s ). Once finished MIOS 1.9g reboots and LCD stands in READY.

I see no errors of any kind on MIOS studio during the upload.

post-8236-087880500 1295406621_thumb.jpg

This is with PSU option A. R80 is in place.

Voltage readings without SIDs connected are as follows:

J3 : 5.16v

J25: 12.55v

C12: 8.97v

J1/2_SID1: 8.96v

SIDs: 8.96v

Cores: 5.15v

Also uploaded testtone to PIC0, no sound.

Any suggestions on where to look for what might be causing the slow transfer rates?

Thanks in advance.

Edited by Moduku
Link to comment
Share on other sites

Uploading mb6582.hex to PIC0 takes forever ( >5000s ). Once finished MIOS 1.9g reboots and LCD stands in READY.

Which means the upload didn't work... Have you uploaded MIOS? If so, how long did that take? If it takes that long, there's usually a problem somewhere that and you cannot really rely on the upload having worked.

Link to comment
Share on other sites

Ok I tried re-uploading MIOS. Same transfer rates ( 0.02 Kb/s ). Took 835s. During upload LCD read "Rebooting MIOS". Once upload was completed, LCD showed Boot screen and then READY.

post-8236-091548900 1295419796_thumb.jpg

Uploaded to PIC1 too with the same results as PIC0.

I have also updated the midi interface drivers but it didn't help.

Link to comment
Share on other sites

It's an E-MU's Xmidi 1x1 Tab. Under Windows 7 64.

Did you install the E-MU Windows driver ?

I can't remember where I found (very recently) that the Windows USB-Midi generic driver is broken when you want to do SYSEX transfers, and that the XMidi works fine when the E-MU drivers are installed.

Downloadable at http://www.emu.com/support/files/download2.asp?Centric=1009&Platform=1

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...