Jump to content

LCD hookup


jensah
 Share

Recommended Posts

Hello

Trying to figure out how to make a simple adapter for the 2 LCD:s that's needed for the LC, since the pinout is completely different, did anyone make a adapter card for it or what?

I'm thinking of making a perfboard with a ribbon cable in and do as in the tutorial document and 2 ribbon cables out with the correct pinout.

Does anyone have a simpler solution?

Link to comment
Share on other sites

Rectangular housings and crimp pins, similar to this:

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=WM2525-ND

You crimp the pins to the end of individual wires, then push the pins into the housing. The result is a connector which will mate with a multi-pin header. You could create adapter cables for each type of LCD.

You would need to solder a header (optionally right-angle) to the LCD.

Link to comment
Share on other sites

the LCDs share the same pins, except for 1 wire, being the adress

so the best is to do what's done for harddrives in computer : ribbon cable. just isolate the adress wire and it is OK

connector is the following http://radiospares-fr.rs-online.com/web/1927350.htmlHE10

Rq : if pinout of LCD and Core differ, just rearrrange order on Core's connector , it is easier than rearranging on each LCD !! (i did this on my seq v2)

Edited by julienvoirin
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...