ganchan Posted July 7, 2011 Report Share Posted July 7, 2011 payment sent! julian i will take one top/back panel from you for sure l8r. tnx. Quote Link to comment Share on other sites More sharing options...
julianf Posted July 7, 2011 Report Share Posted July 7, 2011 payment sent! julian i will take one top/back panel from you for sure l8r. tnx. I know that itlld be nice for the panels to come to people at the same time as the cases, but, whilst i do know the case dimensions, i think that, for the sake of a small delay, it would be better for me to wait untill i have an enclosure in my hands to make 100% sure that evreything fits right, before i cut a load of panels. I know from so many other things in the past that you can look up a dimension off a datasheet (of a jack bush diameter, etc) and then you measure it in real life, with a good set of verniers, and the two numbers are not the same! If i have a case in my hands, i can use real-world measurements to make certain that evreything fits together as nicely as possible : ) I think being sure is worth a short delay : ) Quote Link to comment Share on other sites More sharing options...
kristal= Posted July 11, 2011 Report Share Posted July 11, 2011 If i have a case in my hands, i can use real-world measurements to make certain that evreything fits together as nicely as possible : ) I think being sure is worth a short delay : ) definitely! how much would you charge for a front and backpanel? when time has come, I would like to buy both of them from you, too. Quote Link to comment Share on other sites More sharing options...
flip Posted July 12, 2011 Report Share Posted July 12, 2011 If i have a case in my hands, i can use real-world measurements to make certain that evreything fits together as nicely as possible : ) I think being sure is worth a short delay : ) Definately! Take all the time thats necessary. I'm in for a set of panels too! :) Quote Link to comment Share on other sites More sharing options...
julianf Posted July 12, 2011 Report Share Posted July 12, 2011 definitely! how much would you charge for a front and backpanel? when time has come, I would like to buy both of them from you, too. The 2mm panels, which are the ones that come in all the different colours / finishes should be GBP 85 for the top, and GBP (unknown at the moment) for the back. The 3mm panels, which come in matt black, and natural (silver) only would probably be GBP 100 for the top, and GBP (unknown) for the rear. To give referance to this, Wilbas price optomised file, if ordered from schaeffer, would come to just over Euro 150 inc tax, for the top section alone - which, at the median conversion rate is currently GBP 131 - ie 31% higher than my 3mm price! Quote Link to comment Share on other sites More sharing options...
dreamer Posted July 18, 2011 Report Share Posted July 18, 2011 Also need the panels. The matt red looks sweet :D Quote Link to comment Share on other sites More sharing options...
dreamer Posted July 20, 2011 Report Share Posted July 20, 2011 any news about the enclosures yet? Quote Link to comment Share on other sites More sharing options...
Kyo Posted July 26, 2011 Report Share Posted July 26, 2011 Hiya ! Any update ? Quote Link to comment Share on other sites More sharing options...
strophlex Posted August 9, 2011 Report Share Posted August 9, 2011 What's the status? Did we miss their vecation? Quote Link to comment Share on other sites More sharing options...
Theta_Frost Posted August 15, 2011 Report Share Posted August 15, 2011 (edited) edit Edited August 18, 2011 by Theta_Frost Quote Link to comment Share on other sites More sharing options...
sonicwarrior Posted August 23, 2011 Report Share Posted August 23, 2011 What's the status? Did we miss their vecation? I'm wondering why Schrittmacher doesn't answer. He was online two days ago: Last Active: Aug 21 2011 13:35 At least he could tell us when he ordered and when he expects the cases. His last posting here was 2 months ago. :unsure: I sent him a PM, maybe he didn't subscribe to this thread. Quote Link to comment Share on other sites More sharing options...
strophlex Posted August 29, 2011 Report Share Posted August 29, 2011 I got words from Schrittmacher via TK. He is very busy. He didn't get all the payments before Heidenreich had their three week vecation, but I think that have passed now, so I guess they should be ready soon. Quote Link to comment Share on other sites More sharing options...
Schrittmacher Posted September 11, 2011 Report Share Posted September 11, 2011 He Folks, a was very busy at the last time and had a lot work laying down. Family problems too. Sorry for this long delaying on this Bulkorder. I have send the order an the case will be manufactured. I hope that i can send the first case until end this month to you. Please have a little patience again.... Sorry again folks. Greets Marco Quote Link to comment Share on other sites More sharing options...
klapauzius Posted September 23, 2011 Report Share Posted September 23, 2011 hi there, if theres one of these cases "left" or someone has no use of his case anymore i would be happy to get it. thx Sascha Quote Link to comment Share on other sites More sharing options...
sonicwarrior Posted September 23, 2011 Report Share Posted September 23, 2011 (edited) Schrittmacher canceled the order because of personal reasons so we are now organizing them in smaller groups. There is an upcoming Germany/Austria mini order which happens when we reach 10 cases. We are currently at 6. Seven if you'd like to join and take one case. Please contact the user flip then as he is the organizer. Edit: 10 is reached. flip is ordering the cases now. Edited October 6, 2011 by sonicwarrior Quote Link to comment Share on other sites More sharing options...
orange_hand Posted October 31, 2011 Report Share Posted October 31, 2011 Hi, I am looking for a sequencer case. If somebody has one and doesn't want to build it, please let me know ! Cheers orange Quote Link to comment Share on other sites More sharing options...
Matrix12x Posted November 5, 2011 Report Share Posted November 5, 2011 Is there a US bulk order going on for the case currently? Also, does anyone have a case they are no longer interested in? Quote Link to comment Share on other sites More sharing options...
freddy Posted November 28, 2011 Report Share Posted November 28, 2011 I'm in contact with www.heidenreich.de for manufacturing nice looking aluminum desktop cases based on their "Multiformis" system which can be used for 17"/3U frontpanels like Wilba's MBSEQ frontpanel, but also for other purposes/MIDIboxes. Hi, too bad I missed all the bulk orders :/ Slightly off-topic, but did anyone use Heidenreich's front plate service when the box was ordered? If so, any comparison to Schaeffer's service? Thanks, freddy Quote Link to comment Share on other sites More sharing options...
sonicwarrior Posted February 19, 2012 Report Share Posted February 19, 2012 Did anyone order a frontpanel by now? I found Wilbas frontpanels here: http://www.midibox.org/dokuwiki/doku.php?id=wilba_mb_seq But I'm wondering if this is already approved. Quote Link to comment Share on other sites More sharing options...
lukas412 Posted February 19, 2012 Report Share Posted February 19, 2012 I ordered a modified 19" front panel based on wilbas after the case fiasco and build my own case. It turned out amazingly well. Nicest panel Ive ever seen. Ill post some pics once i get some finish on the wood. Quote Link to comment Share on other sites More sharing options...
Echopraxia Posted March 28, 2012 Report Share Posted March 28, 2012 (edited) Just curious if there is a desire to run another bulk order of these cases? Edited March 28, 2012 by Echopraxia Quote Link to comment Share on other sites More sharing options...
Lamouette Posted March 28, 2012 Report Share Posted March 28, 2012 One for me ! Quote Link to comment Share on other sites More sharing options...
nangu Posted March 28, 2012 Report Share Posted March 28, 2012 I'm in for two whenever somebody wants to do a run. I'd rather get the silver finish than black, but black would be fine if that's what people want to do first. Quote Link to comment Share on other sites More sharing options...
gomiboy99 Posted March 28, 2012 Report Share Posted March 28, 2012 Just a word of warning, the case as TK designed it is just a bit too small for the LPC board. It was designed with the old CORE32 in mind. Tim. PS. The minimum order quantity for cases is 10 and it is cash with order for new customers. Quote Link to comment Share on other sites More sharing options...
Echopraxia Posted March 29, 2012 Report Share Posted March 29, 2012 (edited) PS. The minimum order quantity for cases is 10 and it is cash with order for new customers. new customer meaning buying from Heidenreich directly right? Not some one form MB Fourms? If we can get 6 more to join in... I may want two myself if the cost is low enough. I'll have to look into why the LPC would not fit. It seems like there would be plenty of space. Chris Edited March 29, 2012 by Echopraxia Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.