kogz23 Posted June 7, 2011 Report Share Posted June 7, 2011 Hello all, I am testing an MB-6582 with a home brew control surface. The problem I have is with the mod matrix. When selecting a source and target the leds work correctly as does the actual routing. The problem is that the target is not updated in the LCD. It stays with ---. The source is updated though as is the actual routing and led behaviour. So I'm confused. Any ideas? Cheers Al Quote Link to comment Share on other sites More sharing options...
TK. Posted June 8, 2011 Report Share Posted June 8, 2011 hi, thats the expected behaviour. the displayed target is an additional destination for the routing path, such as LFO depth/rate, CV, MODs, etc... They can be optionally selected with the rotary encoder. best regards, thorsten. Quote Link to comment Share on other sites More sharing options...
kogz23 Posted June 8, 2011 Author Report Share Posted June 8, 2011 Oh, doh! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.